Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Electronics & Photo

Isolation Transformers


Steren Outdoor 75 To 300-OHM Matching Transformer with Weather Boot

Steren Outdoor 75 To 300-OHM Matching Transformer with Weather Boot Lowest new price: $2.79
List price: $1.90
Brand: Steren
Model: 200-490

Bandwidth 5-900MHz UHF-VHF-FM. Includes protective weather boot

Features:

  • Bandwidth 5-900MHz UHF-VHF-FM
  • Includes protective weather boot
  • 75/300-ohms Impedance-matching balun

Similar Products:


Whirlwind ISOXL Line-Level Isolation Transformer, 3-Pin XLR Male/Female Connectors

Whirlwind ISOXL Line-Level Isolation Transformer, 3-Pin XLR Male/Female Connectors Lowest new price: $45.64
List price: $46.29
Brand: Whirlwind
Model: 4330212609

Line Isolator, inline barrel, XLRF to XLRM

Features:

  • XLR line-level isolation transformer
  • Use it to eliminate ground loops and insert in line to combat hum

Similar Products:


HC Lighting - Halogen / Xenon Electronic Transformer 75 Watt Max output 120 Volt Input / 12 Volt Out Put Potted Transformer

HC Lighting - Halogen / Xenon Electronic Transformer 75 Watt Max output 120 Volt Input / 12 Volt Out Put Potted Transformer Lowest new price: $13.99
List price: $13.99
Brand: HC Lighting

HC Lighting - Halogen / Xenon Electronic Transformer 75 Watt Max output 120 Volt Input / 12 Volt Out Put Potted Transformer. This transformer has a 20 watt minimum load requirement. Perfect Replacement for HD60, TST60, TST75, HD 60, Pilot 50 watt, Topstar, Premium, American Elex Transformer. Fully Potted Electronic transformer with

Features:

  • Electronic Halogen Transformer replaces many popular brands and meets or exceeds specifications
  • 75 Watt Output with Minimum 20 Watt Load when testing with voltage meter
  • 120 Volt (VAC) Input - 12 Volt (VAC) output
  • Fully Potted Unit to help protect circuitry from elements.
  • Auto Reset Protected >20KHZ 60HZ - 0.5A


Tripp Lite IS500HG Isolation Transformer 500W Medical Surge 120V 4 Outlet TAA GSA

Tripp Lite IS500HG Isolation Transformer 500W Medical Surge 120V 4 Outlet TAA GSA Lowest new price: $199.00
Lowest used price: $139.00
List price: $285.26
Brand: Tripp Lite
Model: IS500HG

The Smart Transformer Solution for Medical Facilities

All isolation transformers must conform to the UL 60601-1 standard when used within medical patient care areas. Get complete, compliant protection for all sensitive devices in the patient care area and prevent power disruption with Tripp Lite’s Isolator IS500HG Power Conditioner. Featuring an internal isolation transformer with a Faraday Shield, the IS500HG completely isolates equipment from line noise that can cause incremental, but devastating, equipment damage. Its 510-joule surge suppression rating protects equipment from surges and spikes caused by utility power disruptions and the operation of nearby equipment on the same circuit. With 100% isolation from the input AC line, the IS500HG eliminates leakage and shock potential down to less than 100μA. The IS500HG’s 10-ft. power cord allows for flexibility when installing, while the built-in circuit breaker prevents dangerous circuit overloads. 500 watts of capacity allow for use with a variety of sensitive monitoring, diagnostic, and computer equipment. The widely spaced hospital-grade output receptacles fit any standard input plug and the power switch offers convenient, one-touch power control. For peace of mind, the IS500HG features a rugged, all-metal housing and comes with a two-year warranty.

IS500HG Feature Focus
IS500HG Feature Focus
View larger
IS500HG Hospital Grade Plug
IS500HG Hospital Grade Plug
View larger
Approved for Use in Patient Care Areas

UL 60601-1 compliance is required for isolation transformers within patient care areas in order to avoid hazardous conditions and provide an optimally safe environment for patients, staff, and visitors. By isolating equipment from unpredictable and disruptive utility power, the IS500HG eliminates the need for dedicated circuits or costly upgrades to a healthcare facility’s electrical system. The internal isolation transformer with Faraday Shielding provides 100% isolation from the AC power line for equipment plugged into the IS500HG and reduces leakage to less than 100μA for full UL 60601-1 compliance. The IS500HG is perfect for protecting sensitive medical equipment that can be affected by EMI/RFI line noise, utility switching transients, background spikes, and other unpredictable power conditions.

High-Capacity with Robust Features

The IS500HG’s 1000-watt capacity can handle a variety of electronic medical devices, while features like a 510-joule surge suppression rating, integrated circuit breaker, and powerful line noise filtering provide ultimate protection and safety in even the most hazardous conditions. With continuous transformer filtering and no wearable parts, the IS500HG reduces surges in the worst power environments to harmless levels.

Convenient, User-Friendly Operation

A 10-ft. cord allows for flexible installation, while 4 hospital-grade NEMA 5-15R-HG output receptacles let you plug standard equipment into the IS500HG without any adapters or custom power cords. Operation is easy; simply plug the IS500HG into a grounded three-prong utility outlet, plug your equipment into the IS500HG, and turn the power on with simple, one-touch lighted power switch.

2-Year Warranty and Environmentally Responsible Design

The IS500HG is backed by a 2-year warranty. As part of Tripp Lite’s commitment to environmental responsibility, it is manufactured in compliance with strict RoHS specifications.

IS500HG In Use
IS500HG In Use
View larger
TAA Compliance

The IS500HG meets the requirements of the Trade Agreements Act (TAA), making it possible for use in government agencies and educational institutions.


Tripp Lite IS500HG Medical-Grade Isolation Transformer:
  • Complete line isolation, noise filtering and surge suppression for sensitive medical equipment
  • Full UL 60601-1 compliance permits use within designated patient-care areas
  • Faraday Shield offers 100% isolation from the input AC line
  • 500-watt continuous capacity with 4 hospital-grade NEMA 5-15R-HG output receptacles
  • 510-joule surge suppression rating
  • 10-ft. power cord with hospital-grade input plug allows for installation flexibility
  • Circuit breaker provides overload protection
  • Convenient, lighted power switch for simple power control
  • TAA-compliant for GSA Schedule purchases
  • 2-year warranty

Features:

  • Complete line isolation, noise filtering and surge suppression; ideal for sensitive equipment
  • 500 watts, 4 5-15R-HG hospital outlets, 10-ft. power cord with NEMA 5-15P-HG plug
  • Internal low-impedance isolation transformer with Faraday shield offers 100% isolation from the input AC line
  • Leakage less than 100 microamps
  • 2 year warranty

Similar Products:


Acme Electric T253010S Dry-Type Distribution Transformer, 1 Phase, 1.00 kVA, 60 Hz, 240 x 480 Primary Volts, 4 Windings, Wall Mount, Steel, Gray

Acme Electric T253010S Dry-Type Distribution Transformer, 1 Phase, 1.00 kVA, 60 Hz, 240 x 480 Primary Volts, 4 Windings, Wall Mount, Steel, Gray Lowest new price: $135.59
Lowest used price: $145.00
List price: $135.59
Brand: Acme Electric
Model: ACMT253010S

Dry-Type Distribution Transformer, 1kVA VA Rating, 120/240VAC Output Voltage, 240/480VAC Input Voltage, Wall Mounting, Enclosure Type Indoor/Outdoor, Width 5.50 In., Height 10.5 In., Depth 5.13 In., 115 Degrees C Temp. Rise, Enclosure Rating NEMA 3R, 60 Hz, 14 IP Rating, Color Gray, Enclosure Finish Powder Coated, Enclosure Material Steel, Standards UL Listed, CSA Certified.

Features:

  • Application: Encapsulated
  • Single Phase
  • Color: Gray
  • Material: Steel


HiLetgo ADUM3160 B0505S 1500V USB to USB Voltage Isolator Module Support 12Mbps 1.5Mbps

HiLetgo ADUM3160 B0505S 1500V USB to USB Voltage Isolator Module Support 12Mbps 1.5Mbps Lowest new price: $15.49
List price: $15.49
Brand: HiLetgo

This product is suitable for the following users:
1. Contains strong electricity, strong interference with the working environment
2. Noise sensitive areas
3. USB debugging device
4. A variety of industrial USB devices
5. Other common USB peripherals, such as mouse, keyboard, USB sound card, USB flash drive, printer, digital camera, USB hub (HUB), USB camera.
6.Medical equipment.

Tested Supported Devices:
1.Full speed equipment:
USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives USB Flash Drives (FT232, CP2102, PL2303, CH341 chip).

2.Low speed equipment:
Keyboard, mouse, USBASP, USBHID device, USBCDC device.

3.After testing does not support the device USB wireless network card, some USB3.0 USB.

Precautions:
The product onboard power supply Sunrise Sun B0505S power 1W, when your USB device operating current> 180mA, you can use USB double-headed line plus power supply.
This product supports low speed equipment and full speed equipment, does not support pure high speed equipment (USB2.0). Most USB devices are backward compatible and can be used. If the system prompts an unrecognized device when using, please adjust the speed selector and then reinsert the isolator.

Package included:
1*ADUM3160 B0505S USB to USB Voltage Isolator Module

Features:

  • Compatible with USB2.0
  • Avoid driving, it is more convenient to use.
  • Power supply: from the USB port to the PC host.
  • Support USB control transfer, bulk transfer, interrupt transmission, synchronous transmission/etc.
  • 12 Mbps support USB 1.5 Mbps at low speed and full speed does not support pure high-speed equipment.

Similar Products:


Ventex VT12030-120 - Indoor Neon Transformer - Generation III - 100 to 12,000 Volt (Peak to Peak)- 30 mA - 120 Volt Input - Pull Chain Switch

Ventex VT12030-120 - Indoor Neon Transformer - Generation III - 100 to 12,000 Volt (Peak to Peak)- 30 mA - 120 Volt Input - Pull Chain Switch Lowest new price: $109.99
List price: $115.95
Model: na

Brand Ventex Technology - Family Generation III - Part No. VT12030-120 - Amperage 30 mA - Input Voltage 120 Volt - Output Voltage 100 - 12000 Peak to Peak - Power Factor 93 - UL Listed Indoor - Warranty 2 Years -

Similar Products:


600 Ohm Isolation Transformer

600 Ohm Isolation Transformer Lowest new price: $23.10
List price: $30.80
Brand: Valcom
Model: VMT-2

600 Ohm Isolation Transformer

Features:

  • May be used for magnetically coupling line level audio or isolating ground references from one audio circuit to another
  • Wall mountable
  • Convenient screw terminal connectors
  • Audio isolation transformer
  • Small footprint

Similar Products:


Line Matching Transformer 2A - LP-575 110/220V, 12-0-12V, 2A. Nippon America

Line Matching Transformer 2A - LP-575 110/220V, 12-0-12V, 2A. Nippon America Lowest new price: $15.94
List price: $15.94
Brand: Nippon America
Model: 4330212641

UniversalCenter Taps110/220V12-0-12V, 2A

Features:

  • Line Matching Transformer 2A - LP-575

Similar Products:


BOGEN COMMUNICATIONS WMT-1A TRANSFORMER INPUT MATCHING 10KOHM/600 OHM

BOGEN COMMUNICATIONS WMT-1A TRANSFORMER INPUT MATCHING 10KOHM/600 OHM Lowest new price: Too low to display
Lowest used price: $35.95
List price: $36.69
Brand: BOGEN COMMUNICATIONS
Model: WMT1A

BOGEN COMMUNICATIONS WMT-1A TRANSFORMER INPUT MATCHING 10KOHM/600 OHM

Features:

  • Price For: Each

Similar Products:


<< Prev   Next >>
Page 4 of 140

[Kindle]    [Kindle DX]
  Privacy Policy

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.