Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Industrial & Scientific

Decade Boxes


AEMC BR07 Resistance Decade Box, 1 to 11.11111 Megaohm Resistance Range, 1% Accuracy

AEMC BR07 Resistance Decade Box, 1 to 11.11111 Megaohm Resistance Range, 1% Accuracy Lowest new price: $175.75
List price: $185.00
Brand: AEMC
Model: BR07

These decade boxes are built into a metal bench top box. They are used for testing and calibration. The main function of these decade boxes is to create a resistance or capacitance with a specific value by using a combination of the rotary decade switches. They are equipped with 4mm diameter safety terminals for connection. Designed to international safety standard EN 61010-1. Capacitance and resistance decade boxes, rotary switch selector, stop position to prevent accidental switching from 10 to 0, male ground terminal with safety jack, outputs on 4mm diameter safety terminals, ground jumper lead EN 61010-2-031, 150V categoryII, 50V categoryIII - pollution degree 2, resistance accuracy 1 percent, capacitance accuracy 3 percent. The model BR07 has seven decade ranges from 1 to 10 Mega-Ohms.

Features:

  • These decade boxes are built into a metal bench top box
  • They are used for testing and calibration
  • They are equipped with 4mm diameter safety terminals for connection
  • Designed to international safety standard EN 61010-1
  • Rotary switch selector


Extech 380400 Resistance Decade Box

Extech 380400 Resistance Decade Box Lowest new price: $87.87
List price: $109.99
Brand: Extech
Model: 380400

The product type is Extech Instruments 380400 Resistance Decade Box. Manufactured by Extech Instruments.

Features:

  • Range 1 ohm to 11Mohms
  • Values can be set in 1 ohm increments
  • Durable plastic housing
  • Accuracy 1%
  • Case may be grounded separately

Similar Products:


Eisco Labs 4 Decade Resistance Box, Variable from 0 - 11,110 Ohms, 0.5W Resistors (0.5555W Theoretical Max)

Eisco Labs 4 Decade Resistance Box, Variable from 0 - 11,110 Ohms, 0.5W Resistors (0.5555W Theoretical Max) Lowest new price: $54.96
List price: $54.96
Brand: EISCO

This decade resistance substitution box provides 4 decade ranges asgiven below and total value 0 to 11110 Ohms with a resolution of 1 Ohm. Each decade is selected using rotary switch. All resistance values are of ±1% tolerance and with 0.5 watt resistors, 0.5555 watts is the theoretical maximum.

Features:

  • Standard decade resistance box
  • Up to a total of 11,110 Ohms
  • Resolution at 1, 10, 100, and 1000 Ohms
  • 0.5 watt resistors

Similar Products:


Global Specialties RDB-10 Resistance Decade Box, 0.3 ohm

Global Specialties RDB-10 Resistance Decade Box, 0.3 ohm Lowest new price: $86.66
List price: $101.95
Brand: Global Specialties
Model: RDB-10

Model RDB-10 is a hand held Resistance decade box that creates a specific resistance value using a combination of switches. Designed with accuracy to meet the needs of industry and education alike. The RDB-10 is a compact, convenient tool for aiding in engineering design and testing as well as calibration of test equipment. It offers 7 decades of resistance ranges, from 1 ohm to over 11 megaohm in 1 ohm steps. Easy-to-use slide switches allow for straightforward addition and subtraction of resistance values. RDB-10 is a passive device that requires no power source. The unit is housed in a rugged handheld enclosure with an impact resistant rubber boot. Ideal for service, prototype and experimental and educational use. Input terminals accept standard banana plugs, bare wires, spade lugs or alligator clip. 1 ohm to 11,111,110 ohm in 1 ohm steps resistance. 0.3 ohm internal resistance. 1 watt resistors Power. 2 binding posts connection. 32 to 122 degree F operating conditions temperature. < 80 percent RH humidity. Measures 6" length by 3-11/16" width by 1-57/64" height.

Features:

  • Calibrate test equipment with its high accuracy of 1 percent
  • 28 switches organized in a clean 4 x 7 grid for easy use
  • All switches clearly display a visible white dot when in the on position
  • Includes a protective rubber holster with tilt-stand for ease of use and viewing
  • 1 year warranty

Similar Products:


Global Specialties CDB-10 Capacitance Decade Box

Global Specialties CDB-10 Capacitance Decade Box Lowest new price: $110.86
List price: $135.00
Brand: Global Specialties
Model: CDB-10

Model CDB-10 is a hand held Capacitance decade box that creates a specific capacitance value using a combination of switches. Designed with accuracy to meet the needs of industry and education alike. The CDB-10 is a compact, convenient tool for aiding in engineering design and testing as well as calibration of test equipment. It offers 5 decades of capacitance ranges, from 100 pF to over 11 microfarad in 100 pF steps. Easy-to-use slide switches allow for straightforward addition and subtraction of capacitor values. CDB-10 is a passive device that requires no power source. The unit is housed in a rugged handheld enclosure with an impact resistant rubber boot. Select capacitance in series or in parallel combinations. Calibrate test equipment with its high accuracy of 5 percent. 20 switches organized in a clean 4 by 5 grid for easy use. Includes a protective rubber holster with tilt-stand for ease of use and viewing. Set at any capacitance value from 100 pF to over 11 microfarad in 100 pF increments. Input terminals accept standard banana plugs, bare wires, spade lugs or alligator clips. Determine impedance, reactance and frequency characteristics. Vary capacitance levels in circuitry design, ie: oscillators, filters, timing circuits, impedance matches, rectifiers, and other RF circuits. Internal residual cap: 50 pF maximum. Voltage limit: 50 VDC (non-polarized capacitors). Connection: two (2) binding post. Accuracy: 5 percent (1 microfarad: 100 Hz test freq). Operating conditions temperature: 32 to 122 F. Humidity: < 80 percent RH.

Features:

  • Ideal for service, prototype and experimental and educational use
  • Standard item for electrical, industrial, and lab applications
  • Used for engineering design, trouble shooting, or service
  • All switches clearly display a visible white dot when in the ON position
  • 1 Year warranty

Similar Products:


REED Instruments R5408 Resistance Decade Box

REED Instruments R5408 Resistance Decade Box Lowest new price: $119.00
List price: $119.00
Brand: REED Instruments
Model: R5408

This resistance decade box can be used to design and test circuits. The R5408 features slide switches that allow a user to easily add or subtract to quickly reach the desired resistance range. Once tested, a resistor indicated by the decade box can then be put into the circuit.

Features:

  • Resistance box with 7 decade ranges of resistance
  • 1% Resistance substitution from 1 to 11,111,110Ω
  • Excellent for circuit development
  • 3 binding posts permit isolated substitutions
  • Durable construction


Seven Decade Resistor Substitution Box, 0.1% 0 ohm to 9.999999 Mohm

Seven Decade Resistor Substitution Box, 0.1% 0 ohm to 9.999999 Mohm Lowest new price: $89.00
List price: $89.00
Brand: Innovative Technology
Model: RSB-101

The ITL Resistor Substitution Box (RSB-101) is an easy to use piece of test equipment with 0.1% accuracy, a large display, and convenient push-wheels to set the desired resistance value. Seven decades; Resolution: 1ohm; Range: 0 ohm to 9.999999 Mohm; Power Rating: 100 mW (Not 1% accuracy but 0.1%)

Features:

  • Push-wheel Switches, Red & Black Binding Posts
  • Resolution: 1ohm, Accuracy: 0.1%
  • Range: 0 ohm to 9.999999 Mohm
  • Power Rating: 100 mW
  • Size: 115mm x 90mm x 55mm

Similar Products:


Eisco Labs 4 Decade Resistance Box, Variable from 0 - 11,110 Ohms, 0.5W Resistors (0.5555W Theoretical Max)

Eisco Labs 4 Decade Resistance Box, Variable from 0 - 11,110 Ohms, 0.5W Resistors (0.5555W Theoretical Max) Lowest new price: $57.16
List price: $57.16
Brand: EISCO

This decade resistance substitution box provides 4 decade ranges asgiven below and total value 0 to 11110 Ohms with a resolution of 1 Ohm. Each decade is selected using rotary switch. All resistance values are of ±1% tolerance and with 0.5 watt resistors, 0.5555 watts is the theoretical maximum.

Features:

  • Standard decade resistance box
  • Up to a total of 11,110 Ohms
  • Resolution at 1, 10, 100, and 1000 Ohms
  • 0.5 watt resistors


REED Instruments R5406 Capacitance Decade Box

REED Instruments R5406 Capacitance Decade Box Lowest new price: $139.00
List price: $139.00
Brand: REED Instruments
Model: R5406

This capacitance decade box can be used to design and test circuits. The R5406 features slide switches that allow a user to easily add or subtract to quickly reach the desired capacitance range. Once tested, a capacitor size indicated by the decade box can then be put into the circuit.

Features:

  • 3 Binding posts permit isolated substitutions
  • Slide switches the allow user to simply add or subtract for desired value
  • Excellent for circuit development
  • 100 pF to 11111 Degree F; 100 pF per step (five decades of capacitance)
  • Measures 5-51/64" length by 4-19/32" width by 2" depth


IET LABS RS-201 RESISTANCE DECADE BOX, 0 TO 9999999 OHM

IET LABS RS-201 RESISTANCE DECADE BOX, 0 TO 9999999 OHM Lowest new price: $336.32
List price: $336.32
Brand: IET LABS
Model: RS-201

IET LABS RS-201 RESISTANCE DECADE BOX, 0 TO 9999999 OHM

Features:

  • Price For: Each


Next >>
Page 1 of 4

[Kindle]    [Kindle DX]
  Privacy Policy

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.