|Browse by Catagory:
Thermal Management Products
Lab & Scientific Supplies
Chromatography Columns & Supplies
Lab Diagnostic Supplies
Science Education Curriculum Support
Biology Classroom Supplies
Physics Classroom Supplies
Metals & Alloys
Material Handling Products
Power Transmission Products
Shock & Vibration Control
Soldering, Brazing, Welding & Heating
Industrial & Scientific
Shock & Vibration Control
|Ideaworks JB6368 S/4 Anti Vibration Pads
Lowest new price: $3.99
Lowest used price: $4.85
List price: $5.54
No More Noisy, Walking Washers.-Inch Reduce noise, vibration and pulsating washing machines and also keep them from walking. Reduce maintenance costs for use on washers and dryers.
- Easy To Install Reduce maintenance costs for use on washers and dryers
- Item features easy to install reduce maintenance costs reduce noise
|4 Pack of Anti Vibration Pads 4" x 4" x 7/8" Rubber/Cork Vibration isolation pads
Lowest new price: $8.45
List price: $8.45
Sizing Information Pads Should be Sized so There is No More Than 50 Pounds per Square Inch of Machine Weight On It When Installed (Most Machinery is Designed with Approximately 50 PSI Maximum Base Loading) Installing a Pad Equal to the Size of the Foot with 1/2�� Overlap All Around Will Generally Insure Proper Loading To Dampen Vibration Example: A Machine Weighing 1800 Pounds Will Require an Anti - Vibration Pad Approximately 6�� x 6�� (1800 ��50 PSI = 36 Square Inches or One 6 x 6 Pad). A 3 x 3 Pad Under Each Leg is Required, Provided the Weight is Distributed Evenly Among the Four Legs For Impact Machines (Punch Presses, Drop Hammers) A Lesser Loading Capacity is Recommended - Generally 25 PSI A Double Thickness of a Pad May be Used to Accomplish Proper Loading If Desired When Hold Down Bolts are Necessary, the Bolt Should be Isolated from the Machine Recommended Maximum Loading Capacity: 50 Lbs per Square Inch
- 4 pack of Anti Vibration pads Rubber & Cork 50 PSI max load
- Applications are endless.... Air Compressors, HVAC, Stereo Equipment, Treadmills etc etc
- Designed for Indoor & outdoor applications
- Alternate Rib Height for Additional Vibration Isolation Under Both High and Low Weight Loads
- Designed to Resist Aging, Compression Set, Water & Oil
|J.W. Winco 6T75SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/8-16 Thread Size, 1.57" Base Diameter, 2.95 Thread Length
Lowest new price: $8.90
List price: $13.49
Brand: JW Winco
GN 440.5 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. To insure proper leveling mount size, divide the machine weight by the number of feet required. This will equal the pounds or load per leveling foot.
- Hex nut is standard part of assembly
- Assembly screw: Stainless steel
- Optional vulcanized non-skid pad
- All sizes of threaded studs pivot up to 6 degrees
- Rockler Screw-On Tee Nuts 3/8-Inch x 16 TPI, 8 Pack
- The Hillman Group The Hillman Group 4146 3/8-16 x 7/16 x 1 In. Stainless Steel Round Base Tee Nut (8-Pack)
- Hard-to-Find Fastener 014973323165 Brad Hole Tee Nuts, 3/8-16 x 7/16-Inch
- T-Nut 3/8"-16 x 7/16" Stainless Steel, (10 Pack) Choose Size/Quantity, By Bolt Dropper, Pronged Tee Nut. For Wood, Rock Climbing Holds.
- Stainless T-Nuts 3/8"-16 Inch (25 Pack), Threaded Insert, 304 (18-8) Stainless Steel, Choose Size/Quantity, By Bolt Dropper, Pronged Tee Nut. For Wood, Rock Climbing Holds, (3/8"-16 x 7/16")
- T-Nut Leg Leveler (Set of 4)
- Leg Leveler with T-nut (4-pack)
- Adjustable Threaded Pole Leveling Foot Furniture Glide M8x50mm 2 Pcs
- The Hillman Group The Hillman Group 4146 3/8-16 x 7/16 x 1 In. Stainless Steel Round Base Tee Nut (2 Packs of 8)
- J.W. Winco 8T75SA6/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1/2-13 Thread Size, 1.97" Base Diameter, 2.95 Thread Length
|XCEL Foam Rubber Padding - 8-Piece Acoustic Damper Anti-Vibration Closed-Cell Pads
Lowest new price: $16.99
List price: $16.99
Tired of scuffed floors or noisy washers? Save your home and your sanity with this 8-Piece Foam Rubber Padding Set by XCEL. Made in the USA, these durable rubber pads come pre-cut in 6 in. x 6 in. square pieces, ready for a wide variety of uses around the home. If your washer vibrates loudly or tends to walk, place these pads under the feet to keep the unit in place and dampen the sound. Cut them into smaller pieces for use underneath chair legs and bed posts, to protect precious hardwood floors from scrapes and scuffs. These rubber mats even work great as padding under exercise equipment, air compressors, or kitchen appliances. If you're looking for a versatile material you can put to use around your home, XCEL's Rubber Padding Set is perfect for the job.
- STRONG, HIGH QUALITY RUBBER - Made of a closed-cell foam rubber, these pads are naturally non-absorbent and incredibly strong, making them more durable than many others on the market.
- PROTECT SURFACES - Place a piece of XCEL's rubber padding under chair feet or bed posts, to help prevent scratching and marring of hardwood floors. These pads also work great under kitchen appliances or exercise machines to help keep them in place and protect surfaces.
- MINIMIZE VIBRATION - Washing machines tend to vibrate or "walk", creating a lot of noise and potentially damaging floors. XCEL's rubber mats are designed to absorb vibration, cutting down on noise and preventing movement.
- EASY TO CUT - XCEL's rubber pads are easy to cut into different shapes and sizes for any application - just use scissors or a razor to trim to a perfect fit.
- PRODUCT SPECIFICATIONS - Made in the USA; Comes as an 8 Pack of 6 in. x 6 in. square pieces, 1/4 in. thick
|Powermate Vx 094-0137RP Vibration Isolator
Lowest new price: $5.61
Lowest used price: $4.82
List price: $5.61
Powermate Vx 094-0137RP Vibration Isolator is a member of a large line of Powermate genuine replacement parts. A vibration isolator is used to help reduce the vibration and noise that a larger compressor produces. Engineered for easy use, simply mount the large, stationary compressor to the floor with the Powermate Vx Vibration Isolator for minimized reverberation. Powermate is one of the world's leading brands of portable and standby electric generators, air compressors, water pumps, air tools, pressure washers, and accessories.
- 4-Inch by 4-Inch by 1/2-Inch
- For use with stationary units
- A Powermate vibration isolator can also help prevent wear and tear to the compressor and air hoses caused by intense vibration of unit during use
- Powemate vibration isolators curb the noise and vibration produced by large stationary compressors
|Astromania Anti-vibration Suppression Pads Telescope Mounts
Lowest new price: $22.99
List price: $22.99
Imagine you are observing on a clear night, but your enjoyment is spoilt due to the wind or a nearby road making the image in your telescope unsteady. Small vibrations are being transmitted directly to the image. This does not need to be a problem - These new Astromania vibration suppression pads reduce vibration and provide you with a steady image for an enjoyable night's observing. Prevent vibrations - always and everywhere: Just take these anti-vibration pads with you to every observing location - they are the perfect base, both for hard and soft surfaces. On soft surfaces, such as grass, the pads will also prevent the tripod feet both from becoming dirty and from sinking into the ground. Even when you carefully levelled your telescope first, it will remain level when using the anti-vibration pads. Astrophotographers and visual observers love a steady image: A stable image is a must for successful exposures if you want to photograph the night sky. Suppose your telescope is standing on a balcony, terrace or concrete platform. Every step you take is transmitted directly to the telescope and shakes the image around. These flexible vibration-suppression pads insulate the telescope from such vibrations and the result is a stable image. And they let you walk around your telescope without having to worry.
- These pads are sold in sets of 3 (one for each tripod leg) and fits under most tripod feet and works on any surface, dampens out tripod vibrations from the wind or from touching the scope.
- These pads are designed to reduce vibration time by almost 100% and decrease vibration amplitude when placed under each of your tripod legs, prevents dirty tripod feet.
- Makes observing possible when located near to roads, stops the tripod's feet sinking into softer surfaces.
- Ideally suitable for astronomy, nature observations, photography and much more. Reduces the oscillation time for the image to settle down and stop shaking and muffles the strength of oscillations.
- In future, save yourself the annoyance of shaky images and get yourself some real help for frustration-free observing and astrophotography.
|Lisle 20400 Universal Shock Absorber Tool
Lowest new price: $9.99
List price: $16.45
Fits most domestic models and some Ford OEM shock nuts. Place stem socket over shock stem. Hex nut socket fits the nut. Hold one, turn the other for removal.
- For removing and installing shock nuts
- Comes in skin-pack
- Hex nut socket fits the nut
- Hold one, turn the other for removal
- Shipping weight: 9 oz.
|Accugage Rubber Shock Absorber Cover 150256
Lowest new price: $2.99
List price: $2.99
Protects Accugage head from damage.Fits all Accugages.
- Protects Accugage head from damage.Fits all Accugages.
|Mophorn Cab Shock Absorber for International Prostar 2008+ 3595977C96 3595977C95 Cab Air Shock Dampen the Driving Vibration (for International Prostar)
Lowest new price: $189.99
List price: $299.99
Cab Shock Absorber for International Prostar 2008+ 3595977C96 3595977C95
This air spring is new and fits for International Prostar 2008. In the areas of safety, accuracy, durability and quality, this product is similar to the original spare part.This air spring is constructed with high quality material, you can use it for a long time.The air suspension can compress the air in a elastic closed container so that it can work effectively.
Length: 46cm (19inch)
Width: 6cm (3inch)
Height: 6cm (3inch)
Interchange Part Number: Monroe 66127, Haldex SA66127, International Navistar 3595977C96, International Navistar 3595977C95, 3806428C91, Automann A90127, SA66127
Aircraft grade quality aluminum
Direct fit, no modification necessary
Vehicle specific original equipment style replacement air spring assembly
Built with brand new rubber to ensure the life of air spring
Cab Shock for Long Sleeper #3595977C96 #3595977C95
IHC CAB AIR SHOCK
Haldex SA66127 IHC Cab Air Shock
IHC 359577C95 IHC Cab Air Shock
IHC 359577C96 IHC Cab Air Shock
- Fitment:Fit for Cab Shock Air Bag IHC 2007-2008 Lonestar/Prostar Short Sleeper 3595978C96
- Manufacturer Part Number: TR7C96;Interchange Part Number: Monroe 66127, Haldex SA66127, International Navistar 3595977C96, International Navistar 3595977C95, 3806428C91, Automann A90127, SA66127
- The air spring strut is designed to maintain vehicle height level even carrying an uneven load,can hold air pressure and eliminate sag caused by leaking air suspension
- This air suspension shock can efficiently dampen the driving vibration, improve ride comfort in tough road and heavy-loaded conditions
- This suspension strut is new and suitable for the vehicle models International Prostar 2008+ 3595977C96 3595977C95
|4pcs 1 1/4" x 1 1/8" Rubber Shock Absorber Vibration Isolator Mount M8
Lowest new price: $16.47
List price: $16.77
- These rubber vibration isolator mounts measure 62mm length from end to end.
- These rubber vibration isolator mounts measure 1 1/4 inch in thickness( rubber height) and 1 1/8 inch in diameter, and feature two 1/2inch long studs with 3/8inch dia male threads.
- These mounts provide excellent noise and vibration reduction.
- Looking for a mount with a smaller or bigger diameter ? Check out our other listings as we have a similar mount with 1 1/8inch Dia.
- Can not find the mount that you are looking for? Do not hesitate to contact us. We may be able to help you.
- Product Name : RubberVibration Isolator Mounts;Material : Metal, Rubber
- Thread Size (Approx.) : 8 x 13.5mm / 3/8" x 1/2" (Dia.* L);Rubber Size (Approx.) : 30 x 32mm / 1 1/8" x 1 1/4" (Dia.*H)
- Overall Height(Approx) : 62mm / 2.4";Color : Black, Silver Tone
- Weight : 209g
- Package Content : 4pcs xRubberVibration Isolator Mounts
Page 1 of 1326
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.