Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Industrial & Scientific

Springs


Cabinet Door Lift Support, Set of 2 Gas Prop Gas Strut 100N/22.5lb Lid Support, Gas Cylinder, Pneumatic Gas Spring Safe and Soft Close for Cabinet/Toy Box/Window

Cabinet Door Lift Support, Set of 2 Gas Prop Gas Strut 100N/22.5lb Lid Support, Gas Cylinder, Pneumatic Gas Spring Safe and Soft Close for Cabinet/Toy Box/Window Lowest new price: $9.99
List price: $24.99
Brand: kockuu
Model: IN-GASSPRING-100N

Features:

  • Lids soft open gently, ideal for supporting the lid to keep it open
  • Lids lower gently, ideal for soft closing lid from smashing kid's fingers
  • Perfect for various box / toy chest / toy box to prevent from smashing hands
  • Satin silver finishing, suitable for all types of overhead cabinet / doors / box
  • Better Piston with brass conductor

Package Included:

  • 2 X Cabinet Door Lift Pneumatic Support
  • 12 X Screws

Features:

  • Ideal for supporting the cabinet door/lid to keep it open
  • Perfect for various box/toy chest/toy box to prevent from smashing hands
  • Made of High Quality alloy, heavy duty for long-term use
  • Support opens cabinet door/lid to a maximum angle of 100 degrees
  • Package included: 2 X Soft Close Lid Strut and 12 X Screws

Similar Products:


JR Products GSNI-5200-60 Gas Spring

JR Products GSNI-5200-60 Gas Spring Lowest new price: $13.36
Lowest used price: $11.75
List price: $17.45
Brand: JR Products
Model: GSNI-5200-60

Black Nitride Shaft Gas Springs Plastic Socket Type Of End extended 17 inchComp'd 11 inchStroke 6 inchRod diamater 6mmTube diamater 15mmForce(pounds) 60

Features:

  • JR Products Gas Spring
  • Extended Length: 17"
  • Compressed Length: 9.66"
  • Force: 60 lbs.
  • Equipped with EF-PS30 End Fittings

Similar Products:


T-MEKA 1Pcs New Convenience Stainless Steel Juice Shaker Ball Milk Drink Blender Bar Kitchen House Mixer Cook Tool

T-MEKA 1Pcs New Convenience Stainless Steel Juice Shaker Ball Milk Drink Blender Bar Kitchen House Mixer Cook Tool Lowest new price: $1.48
List price: $2.25
Brand: T-MEKA

Features:

  • Material: Stainless Steel
  • Size: 5.5cm
  • The package contains: 1 x Shaker Ball


uxcell 0.5mmx6x25mm Stainless Steel Dual Hook Small Tension Spring 24pcs

uxcell 0.5mmx6x25mm Stainless Steel Dual Hook Small Tension Spring 24pcs Lowest new price: $5.45
List price: $6.43
Brand: uxcell
Model: US-SA-AJD-133039

304 stainless steel material,silver tone,dual hook.
Tension spring can be used in many occasions, such as production and assembly, experiment, research and development, maintenance, etc.. Spring in the global market occupies an important position, are widely used, marine, computer, electronics, automotive, mold, biological, chemical, aerospace, railway, nuclear power, wind power, thermal power, engineering machinery, mining machinery, construction machinery, elevators, and other fields

Features:

  • Wire Diameter: 0.5mm/0.02"; Outer Diameter: 6mm/0.24"
  • Total Length(Nature State): 25mm/1"; Material: Stainless Steel
  • Package Content: 24pcs x Tension Spring
  • Product Name: Tension Spring
  • Weight: 19g

Similar Products:


Remington Industries 0.25X1.0FLT6061T6511-24 1/4" x 1" Aluminum Flat Bar, 6061 General Purpose Plate, 24" Length, T6511 Mill Stock, Extruded, 0.25" Diameter

Remington Industries 0.25X1.0FLT6061T6511-24 1/4" x 1" Aluminum Flat Bar, 6061 General Purpose Plate, 24" Length, T6511 Mill Stock, Extruded, 0.25" Diameter Lowest new price: $19.13
List price: $7.20
Brand: Remington Industries
Model: 0.25X1.0FLT6061T6511-24

6061 aluminum is a lightweight, general-purpose aluminum alloy that can easily be machined or welded. It has a high resistance to corrosion, and an excellent weight-to-strength ratio. The T6511 temperature also means it has been heat treated for additional strength (yield strength: 35, 000 psi). this 6061 aluminum meets ASTM B221 specifications.

Features:

  • High strength, easily welded or machined
  • Material type: 6061 general-purpose aluminum
  • Thickness: 1/4 inch
  • T6511 mill stock

Similar Products:


Prime-Line Products GD 12234 Garage Door Torsion Spring, .250 in. x 2 in. x 32 in., Green, Right Hand Wind

Prime-Line Products GD 12234 Garage Door Torsion Spring, .250 in. x 2 in. x 32 in., Green, Right Hand Wind Lowest new price: $50.14
Lowest used price: $14.49
List price: $60.58
Brand: Prime-Line Products
Model: GD 12234

This torsion spring is constructed of steel and it includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion springs provide lifting force for heavy garage doors and must be selected by the spring’s dimensions, rather than the door’s weight. See the product specifications with illustrations found in Prime-Line’s Torsion Spring Selection Guide to assure that the proper replacement spring has been selected. In the case of dual spring installations, note that the proper use of LEFT WIND & RIGHT WIND springs is imperative. Also, when dual spring installations are involved, it is important to replace both springs, as replacing only 1 spring may add increased strain to the older non-replaced spring. This torsion spring is a regular duty spring with an estimated lifetime rating of 10,000 cycles. As an important safety precaution: all broken or malfunctioning hardware should be replaced with matching hardware, without any modifications. These garage door torsion springs can cause serious injury if not handled and installed properly. If attempting to replace the torsion springs yourself, it is important that the removal or adjustment of torsion springs is not attempted with any other tool other than Prime-Line’s item number GD-52238. Failure to utilize Prime-Line’s item number GD-52238 for the replacement of these springs may result in severe personal injury. These winding rods are used to wind and unwind the tension on torsion springs and they are the only tools recommended for this purpose. Note: To determine the handing of your torsion spring wind, look at the end of the spring with the ‘finger’ of the spring at the top of the wind. When the end of the spring is at 12:00 o'clock and it is pointing to the left, the spring is a right wind; if the end of the spring points to right (positioned at 12:00 o'clock) it is a left wind. When standing inside the garage looking outside, the torsion spring with the black painted winding cone installs on the right side of the door, and the torsion spring with the red painted winding cone installs on the left side of the door.

Features:

  • This right hand wound torsion spring is used for replacing broken garage door springs
  • .250 in. wire size x 2 in. inside dimension x 32 in. length with green color code
  • When dual spring installations are involved, it is important to correctly install both the LEFT & RIGHT WIND SPRINGS during the same job
  • Spring includes stationary & winding cones. Replacement requires use/purchase of item no. GD-52238 and a clear understanding of wire size and handing
  • Right hand springs are mounted to left side of center and left hand springs are mounted to the right side of center (inside the garage looking out).

Similar Products:


Forney 72653 Wire Spring Compression (10-806), 1-1/2-Inch-by-3-1/4-Inch-by-.148-Inch

Forney 72653 Wire Spring Compression (10-806), 1-1/2-Inch-by-3-1/4-Inch-by-.148-Inch Lowest new price: $5.59
List price: $5.59
Brand: Forney
Model: 72653

The Forney 72653 1-1/2-Inch X 3-1/4-Inch X .148-Inch wire spring compression is a zinc-plated steel wire compression spring. Baked for a rust resistant finish and heat treated for performance and longevity. Ideal for a wide variety of uses in homes, the shop, on the farm or ranch, small businesses or light industry such as screen doors, chaise lounges, toys, lawn and garden equipment, industrial and farm equipment, business machines, cars, trucks, boats, RVs and hundreds of other uses. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. 1-1/2-inch (38.1mm) X 3-1/4-inch (82.55mm) X .148-inch (3.76mm) wire spring compression. Max load: 67.0 Lbs. (30.39kg). Manufacturer number: 10-806. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

Features:

  • Used in light industry such as screen doors, chaise lounges, toys
  • Zinc plated steel wire compression spring
  • Baked for a rust resistant finish and heat treated for performance and longevity
  • Ideal for a wide variety of uses in homes, the shop, on the farm or ranch, small businesses

Similar Products:


GENUINE OEM TORO PARTS - SPRING - COMPRESSION 73-8220

GENUINE OEM TORO PARTS - SPRING - COMPRESSION 73-8220 Lowest new price: $0.42
List price: $5.05
Brand: TORO PARTS

GENUINE OEM TORO PARTS - SPRING - COMPRESSION 73-8220

Features:

  • Ships fast to Texas, Gulf and East Coast States!
  • Original oem part

Similar Products:


Prime-Line Products SP 9700 Spring, Compression, 1/4-Inch by 1/2-Inch - .035 Diameter,(Pack of 6)

Prime-Line Products SP 9700 Spring, Compression, 1/4-Inch  by 1/2-Inch  - .035 Diameter,(Pack of 6) Lowest new price: $2.39
List price: $2.89
Brand: Prime-Line Products
Model: SP 9700

This compression spring is constructed from .035 gauge heat tempered steel spring wire. It features an outside diameter of 1/4 In. with a length of 1/2 In. Used for a variety of household applications.

Features:

  • General use spring for toys equipment tools etc.
  • Made from spring steel .035 wire spring
  • Measures 1/4 X 1/2"
  • Nickel Plated

Similar Products:


JR Products GSNI-5300-30 Gas Spring

JR Products GSNI-5300-30 Gas Spring Lowest new price: $14.25
Lowest used price: $12.44
List price: $16.40
Brand: JR Products
Model: GSNI-5300-30

This item is designed to fit specific vehicles. Please ensure correct part fitment before purchasing this project. Contact the seller directly for additional product information and availability.GAS SPRING.

Features:

  • Locks & Catches 20" Gas Spring 30# Gsni-5300-30 Jr Products

Similar Products:


<< Prev   Next >>
Page 4 of 216

[Kindle]    [Kindle DX]
  Privacy Policy

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.