Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Musical Instruments

Power Amplifiers


Crown XLi1500 Two-channel, 450W at 4Ω Power Amplifier

Crown XLi1500 Two-channel, 450W at 4Ω Power Amplifier Lowest new price: $199.00
Lowest used price: $185.07
List price: $299.00
Brand: Crown
Model: XLi1500

The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features:

  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity - 0.775V and 1.4V
  • Electronically balanced RCA & XLR inputs; binding post and Speak on outputs
  • Efficient forced-air cooling prevents excessive thermal buildup
  • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
  • Input: balanced XLR (x2), unbalanced RCA (x2); Output: Speak on (x2), Binding Post (x2 pair)
  • Power: 450W at 4Ω, 330W at 8Ω
  • AC input voltage: 220V, 50/60Hz

Similar Products:


BEHRINGER MICROMON MA400

BEHRINGER MICROMON MA400 Lowest new price: $24.99
Lowest used price: $18.95
List price: $24.99
Brand: Behringer
Model: MA400

BEHRINGER MICROMON MA400

Ultra-Compact Monitor Headphone Amplifier

  • Ultra-compact monitor headphone amplifier for studio and stage applications
  • Personal ''more me'' mixer - mix a mic plus a monitor signal and hear them via headphones
  • Flexible Mic In and Mic Through connectors plus Ground Lift switch
  • Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
  • High-power headphone output on 1/4'' and 1/8'' jack connectors
  • DC 12 Vadapter included
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany

The ultra-compact MICROMON MA400 is the ideal personal monitor mixer for the performer who always asks for "more me."

Connections

The MA400 features XLR THRU jacks and provides superb noise-free operation. Just connect your mic to the MIC INPUT and send a line from the MIC THRU to your main mixer. You can even use studio-grade condenser mics, as the MA400 will pass +48 V phantom power, if your mixer is so equipped. The PHONES jacks accept both 1/4" and 1/8" headphone and earbud connections, making the MA400 ideal for hardwired IEM (in-ear-monitor) applications, such as singing drummers and keyboardists. The MA400 comes with a 12 V DC power supply and an LED to indicate when it is powered up.

Masterful Monitor Mixing

Capable of stereo or mono operation, the MA400 is a powerful little mixer that allows you to control two independent sources, a microphone and the monitor feed from your main mixer. Simply adjust the MON LEVEL control to a comfortable setting and then dial in all the "me" you want with the MIC LEVEL control.

Small and Superb

The MA400 is an ideal solution for the "more me" syndrome. Small enough to fit in your pocket - with a price tag to match - check out the MICROMON MA400 at your BEHRINGER dealer today.

Features:

  • Ultra-compact monitor headphone amplifier for studio and stage applications
  • Personal ''more me'' mixer - mix a mic plus a monitor signal and hear them via headphones
  • Flexible Mic In and Mic Through connectors plus Ground Lift switch
  • Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
  • High-power headphone output on 1/4'' and 1/8'' jack connectors

Similar Products:


Peavey Vypyr VIP 2 - 40 Watt Modeling Instrument Amplifier

Peavey Vypyr VIP 2 - 40 Watt Modeling Instrument Amplifier Lowest new price: Too low to display
Lowest used price: $220.39
List price: $199.00
Brand: Peavey
Model: 3608080

Peavey 40W GUITAR AMP

Features:

  • Peavey VYPYR VIP2 40W GUITAR, BASS, or ACOUSTIC AMP with USB
  • Great amp for recording, practice, or live use
  • Peavey 40W GUITAR AMP
  • Almost any amplifier, instrument, sound or effect
  • Built-in Looper (w/ purchase of Sanpera controller)
  • 2-Year Warranty

Similar Products:


BEHRINGER KM750, Black

BEHRINGER KM750, Black Lowest new price: $149.99
Lowest used price: $139.49
List price: $149.99
Brand: Behringer
Model: KM750

BEHRINGER KM750 Professional 750-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response).

Features:

  • 2 x 400 Watts into 4 Ohms; 2 x 200 Watts into 8 Ohms; 750 Watts into 8 Ohms (bridge mode)
  • ATR (Accelerated Transient Response) technology for ultimate punch and clarity
  • Switchable limiters offer maximum output level with reliable overload protection
  • Precise power, signal and clip LEDs to monitor performance
  • XLR, 1/4'' TRS and RCA input connectors for compatibility with any source

Similar Products:


Professional Audio Bluetooth Power Amplifier - 2-Channel Rack Mount Bridgeable, LED Indicators, Shockproof Binding Posts, Cooling Fans 1000 Watt - Pyle Pro PTA1000

Professional Audio Bluetooth Power Amplifier - 2-Channel Rack Mount Bridgeable, LED Indicators, Shockproof Binding Posts, Cooling Fans 1000 Watt  - Pyle Pro PTA1000 Lowest new price: Too low to display
Lowest used price: $87.53
List price: $134.00
Brand: Pyle
Model: PTA1000

PylePro Model : PTA1000

2-Ch. Bluetooth Pro Audio Amplifier

Bluetooth Professional Power Amplifier - 2-Channel Rack Mount Bridgeable Pro Audio Amp (1000 Watt)

Features:
  • 2-Channel (A/B) Amplifier
  • Bridge-able Amp: Bridge Mode Ability
  • Built-in Bluetooth Wireless Streaming
  • (2) 1/4'' TRS Input Connector Jacks
  • (2) XLR Input Connector Jacks
  • (3) SpeakOn Output Connectors (A/B/Bridged)
  • (2) Pair Speaker Terminal / Binding Post Connectors
  • Power, Protect, Clip, Signal LED Indicators
  • Left and Right Channel Level Signal Indicators
  • Built-in Ventilation Cooling Fans
  • Front Panel Control Center
  • Rack Mountable System

  • Bluetooth Connectivity:
  • Simple & Hassle-Free Pairing
  • Instant Wireless Audio Streaming Ability
  • Works with All of Today’s Latest Bluetooth Devices
  • (iPhone, Android, Smartphone, iPad Tablet PC etc.)
  • Bluetooth Network Name: ‘Pyle Speaker’
  • Bluetooth Version: 3.0
  • Wireless Range: Up to 30’+ ft.

  • What's in the Box:
  • Pro Audio Amplifier
  • Power Cable

  • Technical Specs:
  • MAX Power Output: 1000 Watt
  • 2 x 500 Watt @ 4 Ohm
  • 2 x 250 Watt @ 8 Ohm
  • Distortion: <1.0%
  • Input Level: +4dB
  • Signal/Noise Ratio: 102dB
  • Frequency Response: 20Hz - 20kHz, +/-0.2dB
  • Power: 110/220 Volt, Switchable
  • Dimensions (L x W x H): 19.0'' x 11.4'' x 3.9'' -inches

  • The Pyle Pro Audio Amplifier features high-powered 1000 watt MAX power output. Built-in Bluetooth wireless music streaming ability works with all of today’s latest devices including Smartphones, Tablets, Laptops and Computers. Hassle-free receiver pairing allow you to stream wireless audio instantly. The amp’s rack-mountable 2-channel design with bridge-ability mode make it perfect for all sound and studio applications. Additional system connectivity features include 1/4'' TRS and XLR Input Connectors, Speak-On Output Connectors (A/B/Bridged), and Speaker Terminal / Binding Post / Banana Plug Connectors. Dual ventilation cooling fans, aluminum heat sink and overload protection LED indicators keep your equipment safe and your sound secure. Enjoy reliable sound processing power with the Pyle Bluetooth 2-Ch. Bridgeable Power Amplifier.

    Features:

    • BLUETOOTH COMPATIBLE: Built-in Bluetooth wireless music streaming ability works with all of today's latest devices including smartphones, tablets, laptops and computers. Hassle-free receiver pairing allow you to stream wireless audio instantly
    • SAFETY CONSCIOUS POWER SWITCH: When the power amp is turned on, there is a three-second delay, which reduces/eliminates the turn-on transients associated with the system equipment connected to the amplifier and protects loudspeakers
    • POWER LED: Built-in power LED indicators illuminate when the AC main power is being supplied to the amp and both channels are operational
    • SHOCKPROOF BINDING POSTS: Shockproof binding posts are provided. For each channel, the outputs are in parallel and the speaker connection cables can be terminated with banana plugs or stripped wires
    • AUTOMATIC COOLING FANS: Two 2-speed DC fans supply cool air to the amplifier. The fans switch to high speed automatically when the unit requires additional cooling

    Similar Products:


    BEHRINGER EUROPOWER EP4000

    BEHRINGER EUROPOWER EP4000 Lowest new price: $329.99
    Lowest used price: $288.38
    List price: $329.99
    Brand: Behringer
    Model: EP4000

    The Behringer Europower EP4000 stereo power amp features massive power at an value-packed price. You get incredible sound quality and reliability - all in a roadworthy 2U package. Perfect for medium-sized clubs, mobile PA systems, churches, and public installations, the EP4000 has everything you need packed into its trim, no-nonsense chassis. Straightforward front and rear panel layouts make setups and teardowns a breeze, and operation is uber-simple with the EP4000's flexible I/O, detented gain controls, built-in limiters, and informative status LEDs. If you're looking for an value-packed, reliable, high-power amp, check out Behringer's Europower EP4000.

    The EP2000 and EP4000 represent everything musicians love about Behringer's popular EP1500/EP2500--excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.

    Excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. Click to enlarge.

    Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

    XLR and 1/4" TRS input connectors for compatibility with any source.

    Everything You Need, Nothing You Don't
    The über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

    Panel Discussion
    A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into "clipping" and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it's an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky.

    Ultra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system's capabilities).

    The same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.

    These Amps Have Guts
    There's plenty of awesome features on the outside of the EP2000 and EP4000, but there's also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There's no need for fuses, giving you one fewer potential mid-gig headache.

    The EP2000 and EP4000 have both XLR and 1/4" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you're dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home.

    The exhaust fan, visible on the back panel, is the final stage of an internal front-to-back cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rackmount chassis helps these workhorses stand up to all the rigors of the road.

    Accelerated Transient Response Delivers the Knock-Out Punch
    It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely highslew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

    The Legend Powers On
    If you read the reviews of the EP2000 and EP4000's older brothers, the EP1500 and EP2500, and it's clear that those amps are renowned not only for their performance and durability, but also their astoundingly low price tags. The EP2000 and EP4000 extend that legacy to the next level.

    What's in the Box
    Behringer Europower EP4000, Power Cable, User's Manual

    Features:

    • 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
    • ATR (Accelerated Transient Response) technology for ultimate punch and clarity
    • Switchable limiters offer maximum output level with reliable overload protection
    • Detented gain controls for precise setting and matching of sensitivity
    • Precise Power, Signal and Clip LEDs to monitor performance

    Similar Products:


    Crown XLS1002 Two-channel, 350W at 4Ω Power Amplifier

    Crown XLS1002 Two-channel, 350W at 4Ω Power Amplifier Lowest new price: $288.50
    Lowest used price: $247.55
    List price: $299.00
    Brand: Crown
    Model: XLS1002

    The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS Drive Core 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

    Features:

    • Class D amp with Crown's ultra-efficient Drive Core technology weighs less than 11 lb. (5 kg)
    • Higher DSP capabilities: More control; has band pass filter per channel
    • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
    • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
    • Set sleep mode after specified time without having to press a button
    • Input: balanced XLR (x2), ¼" TRS (x2), RCA jacks (x1 pair); Output: ¼" Speakon (x2)
    • Power: 550W at 2Ω, 350W at 4Ω, 215W at 8Ω
    • AC input voltage: 100 - 240VAC (±10%), 50/60Hz

    Similar Products:


    4-Channel Home Audio Power Amplifier - w/ 70V Output - 1000 Watt Rack Mount Stereo Receiver w/ AM FM Tuner, Headphone, Microphone Input for Karaoke, Great for Commercial Entertainment Use - Pyle PT720A

    4-Channel Home Audio Power Amplifier - w/ 70V Output - 1000 Watt Rack Mount Stereo Receiver w/ AM FM Tuner, Headphone, Microphone Input for Karaoke, Great for Commercial Entertainment Use - Pyle PT720A Lowest new price: $171.16
    List price: $177.99
    Brand: Pyle
    Model: PT720A

    PyleHome Model : PT720A

    AM/FM/ Tuner Hybrid Amplifier

    1000 Watts AM/FM/ Tuner Hybrid Amplifier W/ 70V Output

  • 1000 Watts Peak Power
  • 450 watts @ 2 ohms
  • 360 watts @ 4 ohms
  • 200 watts @ 8 ohms
  • IPOD/MP3 Input With 3.5MM Cable
  • 110-220V Switchable
  • Digital Fluorescent Output Display Meter
  • AM/FM Quartz Synthesized Tuner
  • Auto Scan, PRE/NEXT/MEMORY/STORE For Radio Stations, 50 Stations Storage
  • Removable Rack-Mount Brackets
  • Separate Level Control
  • All Blue LED’s /Lights Gain Control Through LED DIMMER
  • Remote Control Included

  • Get professional-quality sound and tons of features with this 1000-watt amplifier! The PT720A is well suited for large rooms, including stadiums, auditoriums, and for events when your sound needs to make an impact. It's got plenty of inputs, including two 1/4” mic inputs and a 3.55m jack for your iPod or MP3 player on the front, . It pushes audio over standard speaker jacks at 4, 8, and 16 ohms - or connect to your 70 V PA system. And this amp doesn't just sound great - thanks to the digital fluorescent output display meter and blue LED lighting, it looks great too. Includes a wireless remote control. Runs on 110 or 220 V.

    Features:

    • 1000-WATT POWER: The Pyle 4 Channel Hybrid Amplifier is perfect for karaoke and commercial entertainment system. It gives you 1000W peak power to be used for multi speakers w/ 2-8 ohms impedance allowing you to enjoy high quality audio
    • 7 INPUTS: The personal portable digital amp box supports headphone, 3.5mm jack for iPod, MP3, AM FM tuner, DVD CD player, 2 microphone IN w/ echo for karaoke or event hosting, rec line, 1 RCA for preamp and 2 mono RCA dedicated for subwoofer
    • SPEAKER TERMINALS: The professional integrated indoor house stereo receiver features 8 ohms and 70V speaker terminals allowing you to connect multiple speakers and enjoy high quality amplified surround sound
    • EQ CONTROLS: The sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization and master volume adjustments. It also features blue LED lights which brightness can be adjusted through the LED dimmer
    • DISPLAY METER: The compact and rack mount amplifier has a built-in digital fluorescent display meter which displays all the functions and input used. A remote control is also included in the package for distant audio adjustments

    Similar Products:


    Gemini GPA-6000 5000W Professional DJ Power Amplifier

    Gemini GPA-6000 5000W Professional DJ Power Amplifier Lowest new price: $167.80
    List price: $167.86
    Brand: GEMINI
    Model: GPA-6000

    3000W Professional DJ Power Amplifier .3000 Watt IPP High Power output to drive professional loudspeakers without clipping | Front-to-rer airflow and cooling fan for thermal stability and reliability .XLR to 1/4" (6.5mm Jack) balanced inputs | Stereo and Mono Bridge | Variable speed fan for low noise

    Features:

    • 5000 Watt IPP High Power output to drive professional loudspeakers without clipping | Front-to-rer airflow and cooling fan for thermal stability and reliability
    • XLR to 1/4" (6.5mm Jack) balanced inputs | Stereo and Mono Bridge | Variable speed fan for low noise
    • Comprehensive front panel indicators including signal, clip, protect and bridge | 3 speakon outputs for channels A/B/Bridge
    • 5-Way biding banana plug channel outputs | Bridge control switch | DC output protection and Short Circuit protection | Frequency response 10Hz-50kHz at 1.5 dB
    • Ground lift Switch | Total harmonic distortion: Less than 0.1% | Input sensitivity & Impedance: 0.77V | Signal to Noise (20Hz -20kHz) > 100dB

    Similar Products:


    Pyle Home PAMP1000 160 Watt 2 Channel Home Stereo Power Amplifier

    Pyle Home PAMP1000 160 Watt 2 Channel Home Stereo Power Amplifier Lowest new price: $98.49
    Lowest used price: $87.77
    List price: $98.50
    Brand: Pyle
    Model: PAMP1000

    2 Channel Home Stereo Power Amplifier

    Features:

    • 160w Max
    • 2 Stereo Line Inputs & 1 Stereo Line Output
    • Volume & Balance Controls
    • This model Operates as Zone A or Zone B not both..
    • Replaceable Fuse: T4AL (110/120V), T2AL (220/240V)
    • Power On/Off Switch & LED Indicator - Auto Input Switching - Bridgeable Output - Dimensions: 16.5''W x 2.36''H x 8.2''D
    • Speaker A/B Channel Selectors & LED Indicators - 2 Stereo Line Inputs - Replaceable Fuse
    • Balance Control - 1 Stereo Line Output - Unswitched 200W Max AC Outlet
    • Volume Control - Stereo/Bridged Mode Selector - 110/220 Voltage Selector
    • Auto On Switch - Speaker A/B Binding Post Terminals - Detachable Power AC Input

    Similar Products:


    Next >>
    Page 1 of 50

    [Kindle]    [Kindle DX]
      Privacy Policy

    CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.