|Shoreline Marine Winch Strap 2-Inch X 20'
Brand: Shoreline Marine
2" X 20' Heavy Duty winch strap made from premium polyester webbing. Includes heavy duty hook stitched in to provide the greatest performance and added convenience.
- Includes Utility Hook
- Premium Polyester Construction
- Standard 2" Width Works With Most Winches
|Sentry Ratchet Kayak and Canoe Bow and Stern Tie Downs 1/4" Grow Light Heavy Duty Adjustable Rope Hanger (2-Pack)
Lowest new price: $14.88
List price: $28.88
Make carrying your boat highway safe with these bow/stern tie downs.
Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant.
They're also great for securing non-nautical loads like ladders or lumber.
Rope length upgrade to 10 feet since March 2018, do not worry about the short of rope.
- 1.Reduces setup time and hassle and eliminates time-consuming knots
- 2.Secures the bow and stern of any boat with an easy to use ratchet pulley
- 3.Use for a variety of gear including lumbers and ladder
- 4.Ratcheting bow and stern tie-down racks for transporting kayaks
- 5.Best in class corrosion resistance. Rope length upgrade to 10 feet since March 2018, do not worry about the short of rope.
|Bearing Buddy 70019 Bra - Model 19B, Pair
Lowest new price: $2.62
List price: $3.40
Brand: Bearing Buddy
Genuine Bearing Buddy products are produced with the highest quality standards to assure the durability that characterizes our product. With Genuine Bearing Buddy your trailer, hubs and axles will always be protected. Model 19B. Fits Bearing Buddy model no. 1980, 1980A, 1938, 1968, 2047, 2080 and 2080T.
- Bra Model 19B
- Fits Bearing Buddy model no. 1980, 1980A, 1938, 1968, 2047, 2080 and 2080T
- Sold in pairs
|Seattle Sports Quick Loops
Brand: Seattle Sports
The perfect vehicle accessory for boaters with newer cars that have no place to attach front tie down straps. These Quick Loops provide an under-hood anchor point to keep the nose of a boat pointing forward without drilling, bolting, or otherwise altering a vehicle to safely carry a boat. Pair.
- Simple, quick and effective vehicle tie-down accessory, helps make transporting kayaks or canoes safer and easier.
- Open hood or trunk, position loop where you need it, then close the hood or trunk, leaving just the loop ends of the straps sticking out through the small gap between the hood/trunk and body of car.
- Quick loop locks in place once tie-down straps are attached to the loop ends and tightened.
- 1" nylon webbing is durable and strong and will not damage vehicle
- *Quick Loops should be removed when not in use, since they rely on tension from the tie-down straps to hold them in place
|CE Smith Trailer Post Guide-On with Unlighted Posts- Replacement Parts and Accessories for your Ski Boat, Fishing Boat or Sailboat Trailer
Brand: CE Smith
PVC Post Guide-On. Adjusts Out to 13" each Side Fits Frames up to 3"W x 4-1/4"H 1-1/2" sq. 16 ga Pre-Galvanized Steel post Extends 18" Into 2" PVC tube for strength
- CE SMITH 40" PVC POST GUIDE ON
|BoatBuckle Pro Series Kwik-Lok Transom Tie-Down
- Transom tie-down system for boats
- Each buckle has 1,200-pound breaking strength and 400 pounds safe working load
- Vinyl-coated top hooks and zinc-coated trailer hooks
- 2-inch webbing extends to 2, 4, or 6 feet
- 1,200 lb breaking strength each
- 400 lb safe working load each
- Interactive retail packaging doubles as a storage case
- Zinc coated steel trailer hooks and vinyl coated steel top hooks resist cracking and peeling
|Shoreline Marine Transom Tie Downs
Lowest new price: $9.59
Lowest used price: $6.71
List price: $18.99
Brand: Shoreline Marine
Transom tie downs for securing boat to trailer. Adds peace of mind whenever trailering boat and necessary for long trips.
- High quality webbing
- Coated ends to prevent scratching
- Ratcheting and self locking designs
|Magma Products Combination Bait / Filet Mate and Levelock Rod Holder Mount
Brand: Magma Products
Magma’s original “Bait/Filet Mate” tables have an attractive new look, BLACK! This new color core material has thin white cap layers and a bright black center. Our “Magma” logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning these tables are FDA approved for food preparation or service. Constructed with the finest commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood filet tables. This table will not crack, peel, mildew, absorb bacteria or fish odors, allowing you virtually maintenance free use. Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
Includes Magma’s, most popular, LeveLock all-angle fish rod holder mount that has been manufactured using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance. The quick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage. The 1-1/2” (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders.
The filet table is the perfect addition for any Fisherman with a small open craft where storage is limited yet is big enough for any bait work or filleting those big ones that did not get away.
- UV stabilized compression molded high-density color core polyethylene
- FDA approved for food preparation and service
- Grooved sides and slotted back for overboard drainage
- Convenient ruler and Magma logo engraved into back panel
- Complete with LeveLock rod holder mount
|Pro Series 1000 Lbs. Capacity Swivel Trailer Tongue Jack
Lowest new price: $23.99
Lowest used price: $47.73
List price: $49.20
Brand: Pro Series
Pro Series EJ1000 Trailer Jack is designed for use with marine and utility trailers. Pro Series brand tongue jacks are time-tested and application-proven. Features clear zinc finish for corrosion protection. Bolt-on, includes all necessary mounting hardware and 3/8" pull pin. Sturdy 6" Poly wheel. The Pro Series brand retaining ring swivel mount offers minimal deflection and maximum support. Mount fits up to a 3" x 5" trailer frame. Capacity: 1000 lbs., Travel: 10", Retracted Length: 13", Extended Length: 23" (Measured Center of Mount to Bottom of Wheel) Top Clearance: 11" (Measured Center of Mount to Top of Jack)
- Bolt-On Swivel Tongue Jack, 1000 lbs. capacity
- Sturdy 6" Poly wheel, 3/8" swivel pull pin
- Hardware included to mount up to a 3" x 5" trailer frame
- Clear Zinc finish for corrosion protection
- Limited 1 Year Warranty
- MaxxHaul 70214 Powder Coat Black Trailer Spare Tire Carrier
- Reese Towpower 74329 Winch
- Husky 87076 2" Ball 3" Width 6,000 lbs. Straight Coupler with Chain
- MaxxHaul 70205 12V LED Trailer Light Kit
- CURT 25153 Straight-Tongue Coupler
- Wellmax 12V LED Trailer Light Kit | Utility bulbs for easy assembly | Attachable tail lights for: RV, marine, boat, trailer + for all outdoor terrains | DOT compliant
- ABN Heavy Duty Single Gear Hand Crank Gear Winch with Strap and Hook – 1,200 lb pound Come Along for Trailer, Boat, ATV
- Fulton 22300 0101 Trailer Coupler, Class II 3500 lbs. Rating
- Seamander Marine Boat Trailer Replacement Winch Strap & Snap Hook Quick
- CE Smith Trailer 16661A Class II Rating Safety Chain Set, 3500 lb- Replacement Parts and Accessories for your Ski Boat, Fishing Boat or Sailboat Trailer
|attwood Corporation SP-400-RB 23"-35" Composite Head Transom Saver with roller and Bolt Bracket
Lowest new price: $29.83
Lowest used price: $25.36
List price: $47.71
Protect your investment with Attwood transom Savers. A lifted Outboard puts hundreds of foot-pounds of pressure on the transom - especially during trailering protect your boat and engine with Attwood transom Savers: support the cantilevered weight of the motor stabilize engine and steering mechanism when trailering composite head fits motors <75Hp the Attwood difference: tough components - you'll get long life from our adjustable toggles with replaceable rubber pads.
- 23 inches -35 inches
- Composite head
- Roller/bolt mounting bracket