Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Sporting Goods

Boat Hardware & Maintenance Supplies


Star brite Premium Golden Teak Oil

Star brite Premium Golden Teak Oil Brand: Star Brite
Model: 085132-P

Star brite premium golden teak oil is the finest sealer/preserver/finish for marine teak and other fine woods. Star brite uses premium natural oils that are ultra-refined and modified to form high molecular weight polymers that withstand long-term exposure to salt water and harsh weather. Special high-technology additives are blended in to protect the wood from the sun's damaging uv rays. The result is the ultimate treatment for maximum protection and beauty of teak surfaces. Ideal for use on all fine woods and wood furniture. Directions: if the wood is dirty and/or weathered, first treat it with Star brite premium teak cleaner and Star brite premium teak brightener. Apply to dry teak surfaces using a clean cloth, sponge or brush. Apply by working in the direction of the wood grain to maximize penetration of oil into the wood. Wait 5 minutes before wiping treated area with a clean cloth to remove excess oil. Apply a second coat only if wood is extremely porous. Reapply Star brite premium golden teak oil at the first sign of weathering.

Features:

  • Ultra-refined formula gives teak a natural, warm golden color
  • Polymers provide maximum protection for teak and other fine woods
  • Easy to use, fast drying; ideal for wood furniture, too
  • Contains uv absorbers to protect against weathering
  • Commercial grade, built for superiority and strength
  • The #1-rated teak oil in independent testing

Similar Products:


Amarine-made 4pcs Stainless Steel Cup Drink Holder with Drain Marine Boat Rv Camper

Amarine-made 4pcs Stainless Steel Cup Drink Holder with Drain Marine Boat Rv Camper Lowest new price: $32.99
Brand: Amarine-made
Model: AMM-dh-round

This item contains 4 pieces of drink holders

brand new in the package Marine Grade Stainless steel cup holders
two stage to accomodate several different drink sizes and shapes
very high quality and used by several of the top boat and rv manufactures

Specification

Height overall including drain fitting - 4"

Height overall excluding drain fitting - 3-1/4"

Diameter overall lip outside - 4-1/4"

Diameter inside (large) - 3-5/8"

Diameter inside (small) - 2-5/8"

Hole cutout needed - 3-3/4"

Features:

  • Stainless steel self draining recessed cup holder ;Install almost anywhere; table, counter top, dashboard, seatback, etc.
  • Replaces plastic drop-in cup holders with ease
  • Made of stainless steel for supreme corrosion resistance
  • Includes drain with hose barb, mounting gasket and internal pad
  • Dimensions: 4" H - 3 1/2"ID, 4 1/4" OD, with flange

Similar Products:


Star Brite 3'-6' Standard Extending Handle With 8" Deluxe Brush Combo

Brand: Star Brite
Model: 040192-P

Pole extends from 3 (94 cm) to 6 (183 cm); features two non-slip hand grips and positive twist lock

Features:

  • Medium duty 8-Inch deluxe deck brush with bumper has high density Star prene* fibers for all-purpose deck cleaning.
  • Constructed with aircraft grade, triple anodized aluminum for years of maintenance-free use.
  • *Star prene is a lightweight polymer fiber that does not stain, discolor or become brittle. It resists most cleaning chemicals and withstands heat up to 200░F. This space-age material will not rot, mildew or absorb odors.

Similar Products:


Sea Dog. 582060-1 1/2" Clamp-On Oarlock

Brand: Sea Dog.


MX 2 pcs Stainless Steel Pin w/ Drop Cam & Spring 1/4" x 1" Grip - Lanyard Prevents Loss

MX 2 pcs Stainless Steel Pin w/ Drop Cam & Spring 1/4" x 1" Grip - Lanyard Prevents Loss Lowest new price: $7.99
List price: $7.99
Brand: MxEol

MxEol bimini boat pins with lanyard are quick release bimini hardwares. The bimini top hinge pins are durable and long lasting used with bimini boat top. For boat bimini tops and support poles and boat top bimini support. quick release pins with lanyard made of marine stainless steel and sold by pair.

Features:

  • Marine quick release pins with cables
  • Bimini pins with lanyard
  • Boat pins for boat tops and support poles & boat top bimini support
  • Bimini top pins stainless are durable and long lasting used with bimini boat top
  • Quick release bimini spring loaded clevis pins slidable springs with toggle pin for easy changing on different size bimini

Similar Products:


Snap Setter Heavy-Duty Snap Tool for Fastening, Replacing Snaps, Repairing Boat Covers, Canvas, Tarps

Snap Setter Heavy-Duty Snap Tool for Fastening, Replacing Snaps, Repairing Boat Covers, Canvas, Tarps Brand: Ironwood Pacific

You don't need to go to a custom repair shop to fix your canvas snaps - do it yourself with Ironwood Pacific's Snap Setter Canvas Snap Tool! With precision dies welded directly to heavy-duty nickel-plated locking pliers, the Snap Setter Tool is designed to install the cap (dome) of the snap directly to the canvas in the precise location desired. The locking pliers design provides greater leverage than die-and-peg snap tools, and will last much longer than lighter snap pliers. Nickel plating resists rust. Our heavy duty snap tool is great for installing snaps on boat covers, Bimini tops or tonneau covers. Tool is adjustable for a tighter or slightly looser snap application. Fits the cap (dome) side of the snap.


Replacing snaps with the Snap Setter tool

If you are replacing a broken snap: Remove the old snap if it is still in place - it may just pull apart or you may need to remove it depending on how it failed.

  1. Measure carefully to determine the exact spot to place the snap and make a small hole, or use the hole left after removing an existing snap.
  2. Adjust snap setter so that the punch on the upper jaw meets the anvil on the lower jaw.
  3. Place the hollow post of the boat snap through the hole in your canvas.
  4. Place the snap dome on the concave anvil of the snap setter.
  5. Place the female fitting over the hollow post. Canvas should now be sandwiched between the snap halves.
  6. Make sure that the snap halves are on the correct side of the canvas.
  7. Squeeze the handles hard to set snap. The handles should "snap" closed when snap is riveted closed. You may want to repeat this process once or twice, tightening the snap setter each time, to ensure a tight snap.
  8. Inspect the snap to make sure the edges of the post has rolled over enough so the snap is tight.

Features:

  • Heavy-Duty Locking Pliers with welded snap dies. Durable and ideal for major or minor repair of canvas covers, tarps, boat covers, sail covers, bimini tops, tonneau covers or any heavy fabric.
  • Works effectively on the cap side of the snap, placing snaps precisely where you want them. Quickly and easily install the cap side of the snap! Convenient for dome snap piece - the most commonly replaced part of the snap.
  • Nickel-plated finish resists rust and corrosion from water - great for marine use.
  • Adjustable pliers design enables greater leverage over die-and-peg snap tools
  • Snap Setter Tool available with or without extra marine size 20 snaps. Works great in combination with Ironwood Pacific's Canvas Care Kit!

Similar Products:


Amarine-made 3 Step Stainless Steel Telescoping Boat Ladder Swim Step

Amarine-made 3 Step Stainless Steel Telescoping Boat Ladder Swim Step Lowest new price: $46.99
List price: $46.99
Brand: Amarine-made
Model: AMM-BL-3steps-304

3 Steps Telescopic Platform Boat Ladder
Product Description
The 3 step telescopic boat ladder is made of high quality stainless steel.
This telescopic boat ladder is made to be bolted to a horizontal platform such a the boat floor or side railings depending on the installation.
The design of this platform ladder makes it possible to be used as on a pontoon boat.
Some of customers have also used this as a low profile dock ladder.
Installation is very easy, simply bolt the ladder to a horizontal platform and you are ready to use it!
The steps feature non-slip rubber for your safety as well as a Velcro strap for securing the ladder in a non extended position.
3 Step Telescopic Platform Boat Ladder Specifications
Folded length: 14.75" / 375mm
Fully extended: 34.5" / 875mm
Outside to Outside width: 11.50" / 295mm
Mounting hole distance: 10.0" / 254mm
The 3-Step Stainless Steel Telescopic Boat Ladder has been designed to be compact and efficient.
Sleekly designed and manufactured from a high-grade stainless steel, this marine product has been designed to last in the harsh marine conditions.
100% Brand New Marine-Grade product
Durable construction - 304 Stainless Steel
Compact and efficient - Telescopic Design
3 Tier-Step Boat Ladder
Moulded Black vinyl tread to facilitate easy boarding and ensuring maximum grip for the user, reducing slippage.
Horizontal mount (Top of platform) Hinged bracket allows for the ladder to fold over platform for easy fitting.
Stores on top.
Sleek and contemporary design Telescopic closure to only 375mm for easy storage
Telescopic length 375mm (min) to 875mm (max)
Ladder width: 295mm
Stainless Steel Diameter - 32/25/19mm
Requires mounting screws (stainless steel recommended for marine applications)
25.4cm mounting hole distance

Features:

  • 100% Brand New Marine-Grade product amarine-made brand
  • Durable construction - 304 Stainless Steel
  • Compact and efficient - Telescopic Design
  • Moulded Black vinyl tread to facilitate easy boarding and ensuring maximum grip for the user, reducing slippage
  • Hinged bracket allows for the ladder to fold over platform for easy fitting

Similar Products:


Star Brite Tropical Teak Oil Sealer - No Drip, Splatter-Free Formula

Star Brite Tropical Teak Oil Sealer - No Drip, Splatter-Free Formula Brand: Star Brite

Similar Products:


Dock Edge Dock Cleat,Galvanized

Dock Edge Dock Cleat,Galvanized Brand: Dock Edge
Model: 2808-F-P

This traditional galvanized cleat is ideal for all applications. Can be used on boats as well as docks.

Features:

  • Cast Iron Hot Dipped Galvanized
  • Recessed mounting holes
  • Hexagonal hole shape prevents the head of the bolt from turning when securing the cleat
  • Bolts mount flat to surface of the cleat with recessed holes
  • Large bottom footprint for additional strength

Similar Products:


Dock Edge Flip Up Dock Cleat

Dock Edge Flip Up Dock Cleat Brand: Dock Edge
Model: 2608B-F

Flip-Up Dock Cleat - 8" - BlackCast from solid marine grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.

Features:

  • 2608B-F
  • Dock Edge

Similar Products:


Next >>
Page 1 of 374

[Kindle]    [Kindle DX]
  Privacy Policy

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.