Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Tools

Pool & Deck Repair Producs


Fix A Leak Pool Leak Sealer - 8 oz

Fix A Leak Pool Leak Sealer - 8 oz Lowest new price: $11.39
List price: $11.39
Brand: Marlig Industries

Finds and fixes leaks fast! This concentrated formula will permanently seal leaks and holes up to 1/8 inch in diameter in most any material including plumbing!

Features:

  • Dosage: 8oz per 1,000 gallons

Similar Products:


Spa Choice 472-3-5071 Seal a Leak Minor Cracks and Leaks Repairing Solution for Spas and Hot Tubs, 1-Pint

Spa Choice 472-3-5071 Seal a Leak Minor Cracks and Leaks Repairing Solution for Spas and Hot Tubs, 1-Pint Lowest new price: $17.58
List price: $20.49
Brand: SpaChoice
Model: 472-3-5071

Spa Choice Seal A Leak repairs minor leaks and cracks in your spa or hot tub. Depending on the size of the leak and the number of gallons, it may be necessary to add this Seal A Leak more than once. If the leak location is unknown, add Seal a Leak to the skimmer. If you are sure of the location of the leak, pour Seal a Leak directly into the water at the area of the spa's leak. Spa Choice Seal A Leak is recommended for the repair of minor leaks and cracks in spas. Usually stops leaks in 24 hours. DIRECTIONS FOR USE: 1. Turn pump off. REMOVE cartridge or filter grids to avoid product from passing through the filtration system. 2. If the leak location is unknown, add the recommended dosage to the skimmer. If you are sure of the location of the leak, pour the recommended dosage directly into the water at the area of the leak. 3. After 30 minutes following application, turn pump on and all- ow to run for at least 8 hours. 4. Check spa to see if it is still losing water. A second application may be necessary and can be made within the next 24 hours. 5. Replace filter grids or cartridges after 24 hours and resume normal filtration. Spa may be entered 24 hours after application. DOSAGE AMOUNT: 500 Gallons - 1 ounce, 750 Gallons - 1.5 ounces, 1,000 Gallons - 2 ounces. Notes: Remove cartridge or filter grids to avoid product from passing through filtration system. It is possible that fine fountain jets may block when this product is applied.

Features:

  • Repairs Minor Cracks and Leaks
  • If leak location unknown, add seal a leak to the skimmer
  • If leak location known, pour directly into the water at the area of leak
  • Stops Leaks Within 24 Hours
  • Downloadable User Guide Available Under Product Information: Technical Specifications

Similar Products:


DECK-O-SEAL Deck O Seal Gray 4701032

DECK-O-SEAL Deck O Seal Gray 4701032 Lowest new price: $89.49
List price: $89.49
Brand: Deck O Seal Gray
Model: 4701032

DESCRIPTION DECK-O-SEAL two-part, polysulfide-based joint sealant is a premium-grade, pourable, self-leveling sealant. It is a non-staining sealant that cures at an ambient temperature to a firm, flexible, tear-resistant rubber. DECK-O-SEAL is highly resilient and has excellent recovery characteristics after extended periods of compression or elongation. DECK-O-SEAL has outstanding resistance to most chemicals, to all weather conditions, aging, and shrinkage. USES DECK-O-SEAL is used for caulking and sealing joints subject to concrete movement to provide a firm, flexible, weather-tight seal. It is ideal for sealing joints on swimming pool decks. It is applicable for both interior and exterior use. FEATURES/BENEFITS •Highly resilient with excellent recovery characteristics. •Provides permanent and uniform watertight seal. •Prevents uncontrolled cracking by allowing expansion and contraction during temperature changes. •Stays flexible ... will not become brittle or crack due to ultraviolet exposure. •Resists abrasion, weathering and moisture ... elevated temperatures will not cause discoloration. •Not affected by todays pool chemicals. •Retains joint soundness in service once it is cured and can be stretched or compressed up to 25%. SPECIFICATIONS •CRD-C-506, Type I, Classes A & B •ASTM C 920, Type M, Grade P, Class 25, NT •Federal Spec. A-A-1556A, Type M, Grade P, Class 25, NT PACKAGING Patented, pre-measured, two-component unitized, easy-to-handle package contains proper ratio of base to setting agent, which must be maintained. Ninety-six oz. base material can, setting agent, stirring paddle, and applicator are all included.

Features:

  • DECK-O-SEAL Deck O Seal Gray
  • 4701032
  • DECK-O-SEAL
  • Deck O Seal Gray
  • deckoseal

Similar Products:


Zinsser 260539 Pool Paint, Blue

Zinsser  260539 Pool Paint, Blue Lowest new price: $36.76
List price: $36.76
Brand: Zinsser
Model: 260539

Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces.

Features:

  • Keeps your pool refreshing and inviting
  • Super protective coat
  • Avoid painting in direct sunlight

Similar Products:


DECK-O-SEAL Deck O Seal Tan 4701033

DECK-O-SEAL Deck O Seal Tan 4701033 Lowest new price: $84.39
List price: $84.39
Brand: Deck O Seal Tan
Model: 4701033

DESCRIPTION DECK-O-SEAL two-part, polysulfide-based joint sealant is a premium-grade, pourable, self-leveling sealant. It is a non-staining sealant that cures at an ambient temperature to a firm, flexible, tear-resistant rubber. DECK-O-SEAL is highly resilient and has excellent recovery characteristics after extended periods of compression or elongation. DECK-O-SEAL has outstanding resistance to most chemicals, to all weather conditions, aging, and shrinkage. USES DECK-O-SEAL is used for caulking and sealing joints subject to concrete movement to provide a firm, flexible, weather-tight seal. It is ideal for sealing joints on swimming pool decks. It is applicable for both interior and exterior use. FEATURES/BENEFITS •Highly resilient with excellent recovery characteristics. •Provides permanent and uniform watertight seal. •Prevents uncontrolled cracking by allowing expansion and contraction during temperature changes. •Stays flexible ... will not become brittle or crack due to ultraviolet exposure. •Resists abrasion, weathering and moisture ... elevated temperatures will not cause discoloration. •Not affected by todays pool chemicals. •Retains joint soundness in service once it is cured and can be stretched or compressed up to 25%. SPECIFICATIONS •CRD-C-506, Type I, Classes A & B •ASTM C 920, Type M, Grade P, Class 25, NT •Federal Spec. A-A-1556A, Type M, Grade P, Class 25, NT PACKAGING Patented, pre-measured, two-component unitized, easy-to-handle package contains proper ratio of base to setting agent, which must be maintained. Ninety-six oz. base material can, setting agent, stirring paddle, and applicator are all included.

Features:

  • DECK-O-SEAL Deck O Seal Tan
  • 4701033
  • Deck O Seal Tan
  • DECK-O-SEAL
  • deckoseal

Similar Products:


E-Z Patch 2 Sand Buff Pool Deck Repair Kit - 3 lbs.

E-Z Patch 2 Sand Buff Pool Deck Repair Kit - 3 lbs. Lowest new price: $39.99
List price: $39.99
Brand: E-Z Products

DESIGNED TO MATCH THE ORIGINAL SAND BUFF COLOR DECK!

Used with water and the liquid bonder, this mixture out-performs other patches we have found.

Sand Buff color matches most brands of colored cements/sand textures including Stegmeier in.Frontier Desert Deck in..

Features:

  • Used with water and the liquid bonder.
  • Sand Buff color matches most brands of colored cements/sand textures.

Similar Products:


INSL-X PRODUCTS WR1023092-01 Gallon Blue Water Pool Paint

INSL-X PRODUCTS  WR1023092-01 Gallon Blue Water Pool Paint Lowest new price: $48.97
List price: $69.59
Brand: INSL-X PRODUCTS CORP
Model: WR1023092-01

This item is Insl-X Swimming Pool Paint . Used for Painting Supplies Paint & Stains. This product is Manufactured in United States.

Features:

  • This item is Insl-X Swimming Pool Paint
  • Used for Painting Supplies Paint & Stains
  • This product is Manufactured in United States
  • Ocean blue pool paint
  • Apply over most pool paints
  • Chemical and abrasion resistant
  • Premium quality
  • For use in pools

Similar Products:


E-Z Patch 4 Fast Set Underwater or Above Water White Pool Tile Grout Repair Kit - 3 Pounds

E-Z Patch 4 Fast Set Underwater or Above Water White Pool Tile Grout Repair Kit - 3 Pounds Lowest new price: $27.99
List price: $27.99
Brand: E-Z Products

E-Z Patch 4 Fast Set white tile grout repair mixture sets up quickly for fast grout repairs without having to lower the pool water level. Matches the original pool tile grout used in most pools and can also be used to set tiles underwater. Coverage: Approximately 10 square feet.

Features:

  • Sets up quickly for fast grout repairs without having to lower the pool water level
  • Matches the original pool tile grout used in most pools
  • For underwater or above water tile grout repairs and is fast setting
  • Coverage: Approximately 10 square feet

Similar Products:


E-Z Patch 1 White Pool Plaster Repair Kit - 3 lbs. (coverage: 1.5 sq. ft.)

E-Z Patch 1 White Pool Plaster Repair Kit - 3 lbs. (coverage: 1.5 sq. ft.) Lowest new price: $22.49
List price: $22.49
Brand: E-Z Products

E-Z Patch 1 Fast Set plaster patch mix sets up within minutes and can be used for underwater or above water repairs. This formula bonds better and matches the original plaster color, but can be stained to match existing plaster staining. Color is White and 3 pounds covers 1.5 square feet. Designed for use in cracks at least 3/8-Inch deep.

Features:

  • 3 Pounds covers 1.5 square feet
  • Designed to repair cracks at least 3/8-Inches deep
  • For underwater or above water repairs and sets in 5 minutes
  • This formula bonds better and matches the original plaster color
  • Color is White and can be stained to match existing plaster staining

Similar Products:


Pond Armor SKU-SKYBLUE-QT-R Non-Toxic Pond Shield Epoxy Paint, 1.5-Quart, Sky Blue

Pond Armor SKU-SKYBLUE-QT-R Non-Toxic Pond Shield Epoxy Paint, 1.5-Quart, Sky Blue Lowest new price: $79.27
List price: $79.27
Brand: Pond Armor
Model: SKU-SKYBLUE-QT-R

Pond Shield is a non-toxic epoxy liner, made in the U.S.A designed for the pond and water feature industry. It is used to construct water features or ponds with a more designer, formal or natural look than rubber liners. Using Pond Shield epoxy means no more unsightly folds or creases. In addition, unlike rubber liners, there are eight Standard colors available - Black, Clear, Competition Blue, Sky Blue, White, Gray, Tan and Forest Green and Designer Accent Colors are available in three colors - Gold, Copper and Silver. Pond Shield is used for waterproofing structured surfaces found in water features such as Koi ponds, pools, fountains, aquariums, salt water tanks, hydroponics, streams, waterfalls, reflecting pools, mini lakes, holding tanks, etc. Easily applied and easy to maintain, for most applications, a single coat application is all that is needed for proper coverage. In addition, your pond will be virtually maintenance free with a surface that algae can be easily wiped off of and is safe for fish and plants. Pond Shield offers both strength and flexibility in a coating, strength and flexibility that is tested from -78 Degree F to 140 Degree F. Pond Shield is an epoxy pond liner that has been specifically designed to bond to porous or abraded materials such as concrete, wood, stone, most metals (treated and non-treated), brick, most ridged plastics, tile and many more. With a tensile bond strength stronger than the internal strength of the concrete, your single coat of Pond Shield epoxy will stick to what you apply it to. Over time, hairline cracks can form in concrete, mortar or grout joints. Being flexible, Pond Shield resists mimic cracking and provides the best protection possible in a coating.

Features:

  • Water proof formula suitable for use in a wide range of climatic environments from hot to freeze/thaw conditions
  • Specifically designed for underwater use and to be non toxic and fish and plant safe
  • Self priming formula allows for reliable adhesion for a finished surface that is easy to maintain
  • Can be put into service in as little as 24 hours
  • Can be applied to any constructed surface made of wood metal or stone as well as most plastics and other coatings

Similar Products:


Next >>
Page 1 of 20

[Kindle]    [Kindle DX]
  Privacy Policy

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.