|Browse by Catagory:
Job Site Office
Pool & Deck Repair Producs
Slides, Ladders & Diving Boards
|Powermatic 1352001 Model 3520B 20x35-Inch Wood Lathe with RPM Digital Readout
Lowest new price: $4,981.99
List price: $4,830.00
1352001 Features: -Lathe.-3520B. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 31'' H x 27'' W x 55'' D.
The Powermatic 3520B Woodworking Lathe retains all the features of classic Powermatic lathes--including a sliding headstock, electronic variable-speed control, and a spindle lock--plus some great innovations. To name just a few, a digital RPM readout makes it a snap to keep track of your speed, a redesigned tailstock offers internal storage, and a laser etched quill conveniently self ejects. With the 3520B, you'll get classic reliability and advanced technology--the best of both worlds to help you handle your most important jobs.
| The 3520B|
At a Glance:
- Powerful motor with inverter for 3-phase or single-phase input
- Built-in spindle indexing for drilling hole patterns and routing flutes
- Sliding headstock with electronic variable speed and digital RPM readout
- Tailstock offers internal storage
- Optional dust assembly can travel with the toolrest
Versatile to Suit a Range of Projects
Controls and belt access are conveniently located on the front of the headstock.
The standard comparator mounts make turning sets of duplicate projects easy.
With wide-ranging capabilities, the Powermatic 3520B is ideal for both novice users and seasoned veterans. Incredibly adaptable, the Powermatic 3520B features a 20-inch swing and 34-1/2 inches between the centers to accommodate a huge range of project sizes.
For additional versatility, the included pin can be screwed into the spindle housing to provide up to 24 indexing positions for drilling hole patterns or routing flutes and other equally spaced decorative finishes.
Powerful Motor for High Torque
Driven by a two-horsepower, 220-volt, 6.2-amp, TEFC (totally enclosed fan-cooled) motor, the Powermatic 3520B offers plenty of muscle to get the job done. And because it's equipped with an inverter, the motor can operate with either a single-phase or three-phase input. The motor itself is three phase and receives a single-phase current from the inverter for high torque at low-end, maintenance-free operation.
And to help all that torque efficiently make its way to your workpiece, the motor delivers power through a pair of two-range, multi-groove pulleys that are connected by a durable poly V-belt to prevent surging.
Durable and Resistant to Vibration
Built with precisely machined, thick-walled iron castings, this 682-pound lathe is rigid and stable. It is exceptionally solid and effectively resists vibrations caused by out-of-balance workpieces--so you won't have to worry about bulky sandbags or weights.
Cleverly Designed Headstock for Easy Adjustments
A sliding headstock with electronic variable speed and digital RPM readout provides accurate speed adjustment. What's more, a spindle locking mechanism in the form of a spring-loaded button on the front of the headstock engages one of two locking detents (180-degrees apart) for installing and removing accessories that screw onto the 1-1/4-inch by 8 spindle threads.
Tailstock Includes Built-In Storage
To support large workpieces, the tailstock is made from heavy iron casting. For convenience, a compartment--complete with hinged access door--is built into the tailstock casting to store small often-used tools and equipment. For additional storage options, there's even an attached tool caddy for quick access to centers, wrenches, and more. To top it off, ergonomic chrome-tipped handwheels ensure a comfortable feel, and an optional dust assembly can travel with the toolrest to help maintain proper visibility of your workpiece.
The Powermatic 3520B is backed by a five-year warranty.
What's in the Box
One lathe bed with headstock, tailstock, and tool support base; two leg assemblies; one guard; one 14-inch tool support; one 13-inch face plate; one live center; a one-inch spur center; one index pin; one live center pin; one knockout rod; one face plate wrench; one tool caddy; four levelers; 12 socket hd.cap screws; 12 lock washers; 10 flat washers; two comparator centers; one comparator rear bracket with lock handle; owner's manual; and warranty card.
Based on precisely machined, thick-walled iron castings,
the Powermatic 3520B Lathe is both rigid and stable.
- Wood turning lathe with digital RPM readout, 20-inch swing, and 34-1/2-inches between center
- Powered by a 2-horsepower, 220-volt, variable speed motor
- Made of heavy-duty cast iron, Assembly required
- Accessories-include guard, tool rest, face plate, wrench, knockout rod and spindle lock
- 50x24x44-inches; Backed by 1-year warranty
|Powermatic 1791304 DT45 4 Line Single End 1 Horsepower Dovetailer, 115/230-Volt 1 Phase
Lowest new price: $3,992.99
List price: $4,002.00
1791304 Features: -Power Source:Electric -Voltage:230 -Distressed:No. Dimensions: -Overall Height - Top to Bottom:61 -Overall Width - Side to Side:33 -Overall Depth - Front to Back:33 -Overall Product Weight:447
- Four separate dovetail lines of 1, 1-1/2, 2, and 2-1/2 inches
- Precision carriage bearings are sealed on both ends to eliminate dust build-up
- Visual stylus and template aids in guiding the carriage
- Spring loaded carriage makes for smooth, effortless cutting
- Manual eccentric part clamping
|Powermatic 1791282 OES9138 Oscillating Edge Sander 3HP 1 PH 230V
Lowest new price: $5,598.99
List price: $5,598.99
FEATURES: � 3HP motor with 9" x 138-3/4" abrasive belt handles large workpieces� Oscillates 24 cycles per minute for better finish and longer belt life� 9-1/2" x 48" platen with graphite pad offers largest work surface in its class� Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking� Pedestal control switch for easy access� Large 11-3/4" x 48" front worktable with 8" vertical travel tilts and 45� tilt, includes miter head for angle work� Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking� Large radius end table has 6" vertical travel and 45� tilt for any angle and working height needed� Heavy-duty oscillating gearbox and shaft for long maintenance-free use� Hinged guard opens for infinite length sandingSPECIFICATIONS: � Style (Type): Horizontal/Vertical Oscillating Edge� Motor Phase: 1� Oscillations Per Minute: 24� Motor Power (HP): 3� Sanding Belt Size (L x W) (In.): 9 x 138-3/4� Table Height from Floor (In.): 34-1/2 - 40-3/4� Recommended Circuit Size (Amps.): 30� Dust Port Outside Diameter (In.): 4� Dust Collection Minimum CFM Required (CFM): 1,100� Platen Size (In.): 9-1/2 x 48� End Table Size (In.): 18� Belt Speed (FPM): 3542� Main Table Size (L x W) (In.): 48 x 11-3/4� Main Table Tilt (Deg.): 5 In, 45 Out� Motor Voltage (V.): 230 only� Electrical Controls: Magnetic Starter� Drum Diameter (In.): 4 Outboard, 9 Drive� End Table Tilt (Deg.): 40 In, 45 OutThe large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5� and out to positive 45�. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering su
- Balanced 9 inch drive drum
- Powerful 3HP Motor
- 24V Magnetic Switch
- Heavy-duty Gearbox
- Quick and Easy Belt Changing
|Powermatic 1791292K Model 31A 6-Inch/12-Inch 2 Horsepower Belt/Disc Sander, 230/460-Volt 3 Phase
Lowest new price: $1,521.99
List price: $1,691.00
1791292K Dimensions: -Overall Height - Top to Bottom:54.5 -Overall Width - Side to Side:31.25 -Overall Depth - Front to Back:24 -Overall Product Weight:275
- 2HP, 3Ph motor
- Table for belt head tilts 0-45 degrees downward with miter gauge slot and is adjustable for various angles
- Heavy, cast-iron construction and fully enclosed stand minimize vibration
- 12-inch balanced disc with table tilt
- Multi-position belt head with indexing pin and head lock allows for tool-free belt position changes
|Powermatic 1791296 Model 209 20-Inch 5-Horsepower Planer, 230-Volt 1-Phase
Lowest new price: $2,912.99
List price: $2,912.99
FEATURES: � Knife setting gauge� 5HP motor and 20" planing capacity for heavy duty work� Fully enclosed base cabinet with integrated casters for shop mobility� Cast iron table with extensions creates a big 55-1/2" x 20" working area� Four feed speeds - 24 and 31 FPM, 16 and 20 FPM with gear change - provide versatility� Feed rollers and cutterhead supported by full cast iron head assembly for rigidity� Standard Equipment:� Single-sided knives� 5" diameter dust port� Cast iron extension tablesSPECIFICATIONS: � Motor Phase: 1� Cutterhead Diameter (In.): 3-3/16� Recommended Circuit Size (Amps.): 40� Maximum Planing Width (In.): 20� Motor Voltage (V.): 230 only� Cuts Per Minute: 20,000� Maximum Full Width Depth of Cut (In.): 3/32� Motor Current (Amps): 23� Prewired Voltage (V.): 230 only� Feed Rate (FPM): 24/31 & 16/20� Dust Collection Minimum CFM Required (CFM): 900� Number of Speeds: 4� Knife Size (L x W x T): 20 x 1 x 1/8� Number of Knives: 4� Bed Rollers Adjustable from Front: N.A.� Type of Cutterhead: Straight Knife� Style (Type): Planer� Range of Speeds: 24/31 & 16/20� Maximum Planing Thickness (In.): 8� Table Support: 4 Column� Motor Power (HP): 5� Minimum Planing Length (In.): 6-3/4� Cutterhead Speed (RPM): 5,000� Dust Port Outside Diameter (In.): 5This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20" planing capacity will handle the most demanding work. The 5" dust port connects easily to any dust collector. The cutterhead has four high speed steel knives and turns at 5,000 RPM producing 20,000 cuts per minute. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The
A great value with incredible performance and standard features not available on other models in its class, the Powermatic 209 20-Inch Planer turns out ultra-smooth surfaces quickly and consistently. And because it can create 20,000 cuts per minute, the 209 is the perfect tool for high-capacity jobs. Accurate and dependable, this planer's powerful motor, smooth feeds, and robust construction make it a true workhorse that is a must-have for every professional woodworking shop.
| The 209 20-Inch Planer|
At a Glance:
- 5-HP motor operates at 5,000 RPM
- 4-knife cutterhead makes up to 20,000 cuts/minute
- 2 feed speeds of 24' and 31' per minute
- Converts to 4 speeds via gear box
- Cast-iron components for durability
- 5-inch dust port
Powerful Motor and Cutterhead for Big Results
Locking knobs secure the table to the lead screws within the front and rear columns.
For exceptional finishes, anti-kickback fingers and a pressure bar are located in close proximity to the cutterhead.
The 209 owes its vigorous performance to a five-horsepower motor. Power is transferred from the motor directly to the four-knife cutterhead at 5,000 RRM, which allows for up to 20,000 cuts per minute. This robust design not only means you'll be able to get jobs done quickly, but you'll also be able to tackle workpieces up to eight inches thick and 20 inches wide (minimum length of 6-3/4 inches).
For exceptional finishes, anti-kickback fingers and a pressure bar are located in close proximity to the cutterhead.
Smooth Infeeds and Outfeeds
The Powermatic 209 offers two feed speeds--24 and 31 feet per minute--and the option of upgrading to four speeds via the gear box and included parts.
With this planer, even heavy loads are no problem, as the 209 automatically slows the feed rollers to ensure smooth cuts. To help you return heavy boards to the infeed, there are two heavy-duty return rollers located on top of the machine.
Adjustable, Durable Tables and Convenient Dust Port
The 209's tables are made of cast iron with polished, precision-ground surfaces for durability and easy feeds. A pair of extension wings lets you handle larger workpieces, and four posts give you plenty of workpiece support.
For convenience, a five-inch dust port hooks up to your dust collection system for improved visibility while you work.
Dimensions and Warranty Information
The Powermatic 209 measures 36.6 x 41.3 x 26.0 inches, weighs 770 pounds, and comes with a five-year warranty.
What's in the Box
Planer; dust hood; two cast-iron extension tables; handwheel; handle; low-speed gear kit containing one 50P chain, 12T sprocket, three open-end wrenches, four hex wrenches, and two hardware bags; one knife setting gauge; manual; and warranty card.
The fully enclosed base cabinet features integrated casters for shop mobility.
- Features powerful 5-horsepower motor, 1ph, 230-volt; 770-pounds
- 20-inch planing capacity; 5-inch dust port connects to any dust collector
- 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31-fpm
- Huge 55-1/2-by-20-inch cast iron table; integrated casters for mobility
- Cutterhead includes four high-speed steel knives; turns at 5000-rpm, producing 20,000 cuts per minute
|Powermatic 6050011 Optional Clear Plastic Lower Collection Bags ( 50 each )
Lowest new price: $172.99
List price: $172.99
Powermatic 6050011 Clear Plastic Collection Bags for Model 75 (Pack of 50)
- Large Capacity
- Quick Release Clamps
|Powermatic 2042335 Mobile Base
Lowest new price: $336.99
Lowest used price: $130.49
List price: $380.00
Includes Mobile Base for 66 Table Saw - 2042335
- For Powermatic 66 table saw
- All wheels lock
- Assembly required
|Powermatic 6286600 Replacement Cloth Upper Bag for Model 75
Lowest new price: $78.31
List price: $78.31
6286600 Features: -Dimensions: 1"" H x 12"" W x 8"" D.
- Cloth upper bag for model 75
|Powermatic 1610079 Model PJ882 8-Inch 2 Horsepower Parallelogram Jointer, 230-Volt 1 Phase
Lowest new price: $2,290.99
List price: $2,490.81
1610079 Features: -8'' parallelogram jointer.-PJ882. Specifications: -2HP,1Ph. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 44'' H x 28'' W x 84'' D.
When we look at jointers, there are a couple of tests at the top of our list, and this model aces them all.
First, it’s got a generous 8-inch wide bed, and you can’t do better than that. But icing on the cake is the bed’s luxuriously long 82 inches, giving you absolute support and accuracy on the infeed side. We like the way the infeed table travels up and down; instead of a handwheel, you just loosen the locking lever and move the long-handled table adjustment arm. Leverage is our friend, and there’ll be no more skinned knuckles! Lock the lever again and you’re ready to cut. When you want to cut rabbets – a beautifully simple job on this jointer -- override the 1/8-inch depth limit by turning the control knob. Twist it again to re-engage this feature. The outfeed table adjusts to knife height easily, should your jointer not retain its factory setting during shipment. It’s worth checking.
We like this fence best of all the competitors for a couple of reasons. There’s a non-marring insert in the fence contacts that prevent scratching the infeed and outfeed tables while you’re adjusting it. The fence rides smoothly across the beds and locks easily. But its best trick is tilting 45 degrees – both forward and backward, giving you a total angle to the back of 135 degrees for beveling. And instead of grasping the whole fence to tilt it, this one moves beautifully by handwheel.
The three-knife cutterhead should be perfectly adjusted from the factory, but to be safe, we recommend checking it before running any stock. The head turns at 7,000 rpm, giving you 21,000 cuts per minute and a super-smooth surface.
The final feature that won our admiration is the placement of the power switch. You’ll find it below the infeed bed on most jointers, but on this Powermatic, it’s positioned on its own arm above the infeed table. We like this spot best for safety’s sake – a jointer is a beautiful machine, but with just a little operator error, it has the potential to maim. Having the power switch in the open just makes good safety sense.
We recognize that a jointer like this is a big investment, but we trust the Powermatic name for quality, reliability and a long life. You won’t regret this purchase. --Kris Jensen-Van Heste
- Infeed/outfeed surface measures 8-by-82-Inch
- Depth of cut limitation easily overridden for rabbeting cuts
- Fence tilts 45 degrees to back and front; handwheel operation
- No-mar fence insert keeps beds pristine during fence adjusent
- 7,000 rpm cutterhead gives you 21,000 cuts per minute; limited lifetime warranty
|Powermatic 6286424 Replacement Upper Bag for Model 73
Lowest new price: $48.01
List price: $48.54
- Cloth upper bag for model 73
Page 3 of 4
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.