|Browse by Catagory:
Job Site Office
Pool & Deck Repair Producs
Slides, Ladders & Diving Boards
|Renogy Solar Panel Mounting Z Bracket 4 Units
Lowest new price: $10.99
Lowest used price: $7.69
List price: $11.99
The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick.
- Renogy mounting Z brackets are very easy to use, unique designed, and perfect for irregular surfaces
- All parts you need to mount your panels to roof/wall are included in this product.
- They are composed of aluminum material and are light weight.
- Use them to mount your panels to recreational vehicles or boats.
- Ideal for mounting 50W to 150W solar panels.
|Mohoo 20A Charge Controller Solar Charge Regulator Intelligent USB Port Display 12V-24V
Lowest new price: $18.98
List price: $29.97
Solar controller has specifically designed to meet the needs of the rural electrification market.
Working Temperature: -35°C to +60°C
Self consume: ≤10mA
Float Charge: 13V(default,adjustable)
PWM battery charging
All necessary protections equipped
Adjustable controlling parameter of the system
Suitable for Home, Industrial, Commercial etc.
1.The function of the controller is to protect the voltage overshoot and discharge.
2.When the battery voltage is too low, the controller to stop output; after the solar panels charging, the battery will return to 12.6 v. It is a natural to output.
3.12.6 v is to restore the discharge voltage.
4.When the solar panels to recharge battery float charging voltage can be achieved. It will stop charging. This is called overshoot protection.
5. After the battery discharge, the battery outside will flash, this is to remind the user, the configuration is not reasonable, it need to take battery connection.
6.The controller normal voltage of 10.8 v to 13.7v. This two voltage fluctuation, you can be set manually
If you got trouble in using please try to adjust the Float Voltage to 13.7V:
Firstly, you need to long press the "MCU control" button about 3-4 s, and then there will be a management interface on the screen.
Secondly, you have to press the "Add" button under the screen until the voltage reaches 13.7 volts.
Lastly, you need to re-press the "MCU control" button again, when the display doesn't blink anymore it saves controller recording the data.
1 x Solar Charge Controller
1 x User Manual
- ☀Classic blue models, compared with the upgrade models more durable (classic is eternal)！You deserve it！The product can automatically manage the working of solar panel and battery in solar system. It is easy to set up and operate.For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically (LCD will be unavailable at the same time).
- ☀Change the default setting of solar controller, requires:firstly,Disconnect the solar panel.Secondly,ensure the remain voltage of battery no less than 12V.
- ☀Caution:Controller should connect the battery first,and then connect the solar panel,and finally the load!The disassembly sequence is contrary to the wiring order !
- ☀Solar controllers are built-in electronic fused that do not require replacements.Overloading & Short-circuit protection, Reverse discharging & reverse-polarity protection.Easy to set up and operate. Suitable for home, industrial, commercial etc.
- ☀The controller has a low failure rate and will last a long time and protected with moisture-tight coating, minimizing damage from humidity and from nesting insects.
|ALLPOWERS Dual USB 20A Solar Charge Controller 12V/24V Auto Paremeter Adjustable PWM LCD Solar Controller Regulator with Load Timer Setting ON/OFF Hours
Lowest new price: $18.99
List price: $49.99
"Your Satisfaction is our Highest Priority", contact us firstly if you have any question
The product can automatically manage the working of solar panel and battery in solar system. It is easy to set up and operate.
--Automatically manage the working of solar panel and battery in solar system.
--Overloading and short-circuit protection.
--Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
--Protection from lightning strike.
--Prolong the battery life cycle and keep the load work well.
--Easy to set up and operate.
--Suitable for small solar energy system.
*Voltage: DC 12V/24V
*Rated Charge Current: 20A
*Rated Load Current: 20A
*Over charge Protection: 14.4V/28.8V
*Over charge Floating charge: 13.7V/27.4V
*Charge recover voltage: 12.6V/25.2V
*Over discharge Protection: 10.7V/21.4V
*Over discharge Recover: 12.6V/25.2V
*USB output: 5V/3A
*Operating temperature: -35?-60?
*Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in
<1>Make sure your battery has enough voltage for the controller to recognize the battery before first installation.
<2>the regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
<3>Let the children keep far away from the storage battery and the controller
1 * Solar Charge Controller
1 * User's Manual
Warranty: 18-month product guarantee from ALLPOWERS
- Rated Discharge Current: 20A; USB Output Voltage: 5V/3A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge
- Funtionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
- Mutiple electric protection: over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection
- Good Heat Dissipation: Dual mosfet reverse current protection, low heat production
- Easy to use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc
|Renogy 100 Watts 12 Volts Monocrystalline Solar Starter Kit
Lowest new price: $189.99
Lowest used price: $153.84
List price: $196.99
Renogy 100W Monocrystalline Starter Kit is designed specifically for customers new to solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence. This solar kit comes with the tools necessary for a new system: a Renogy 100W 12V Monocrystalline Solar Panel, a 30A PWM Wanderer Charge Controller, a 20ft 10AWG MC4 Adaptor Kit, an 8ft 10AWG Tray Cable, and a set of Z-brackets. Start your solar adventure with a Renogy Starter Kit. Negative grounding controller ensures the broader off grid applications and safety, especially to be used on a vehicle which has battery negative on the chassis. A little extra investment on the right charge controller will generate a much higher return and prevent system failure.
- The charge controller has been upgraded to Renogy's new 30A PWM NegativeGround Charge Controller the Renogy Wanderer
- With the Renogy Wanderer 30A PWM Charge Controller, you can expand your system up to a maximum of 400W
- The kit now includes an 8ft 10AWG Tray Cable to connect your charge controller and battery
- Ideal output: 500Wh per day; can fully charge a 50Ah battery from 50% in 3 hours (depending on the availability of sunlight)
- Negative grounding controller ensures the broader off grid applications and safety, especially to be used on a vehicle which has battery negative on the chassis
|HQST 100 Watt 12 Volt Polycrystalline Solar Panel
Lowest new price: $106.99
List price: $139.99
The HQST 100 Watt 12 Volt Polycrystalline Solar Panel is a key component in establishing an off-grid solar energy system. Weighing in at only 16.5lbs, this panel contains 36 efficient polycrystalline solar cells protected by a thin layer of tempered glass. The panel is designed to withstand heavy snow and wind loads. The back of the panel features a waterproof junction box and MC4 leads for easy plug and play use! Use this panel alone or add additional panels to create a custom solar energy system.
Maximum Power: 100W
Maximum System Voltage: 600V DC (UL)
Optimum Operating Voltage (Vmp): 17.8V
Optimum Operating Current (Imp): 5.62A
Open-Circuit Voltage (Voc): 22.4V
Short-Circuit Current (Isc): 5.92A
Dimensions: 39.7 X 26.7 X 1.4 In
If you have any questions regarding this product, please call us at 1 (800) 390-9264 or email [email protected]
- Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance, Withstand high winds (2400 Pa) and snow loads (5400 Pa). IP65 rated junction box provides complete protection against environmental particles and low pressure water jets.
- Pre-drilled holes on the back of the panel allow for fast mounting and securing. Compatible with different mounting systems such as Z-brackets, Pole Mounts, and Tilt Mounts.
- High module conversion efficiency. Ideal output: 500Wh per day (depending on the availability of sunlight). Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments.
- Advanced encapsulation material with multilayered sheet laminations to enhance cell performance and provide a long service life. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades
- 5 years material and workmanship warranty and 25 years power output warranty.
|Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat
Lowest new price: $18.99
List price: $24.00
Brand: Link Solar
Other models are available
Single Cable Entry Gland(white,2mm² to 6mm²) -- http://a.co/fU9OLP8
Single Cable Entry Gland(black,6mm² to 12mm²) -- http://a.co/aHQhE77
Link Solar ABS Solar Cable Entry Gland is used for the passing of cables into the Motorhome ,from the Solar panel ,or for use on yachts /boats for cable entry from the mast.
It can also be used for other installations and structures such as buildings, garages, sheds and other roofs
Designed and manufactured by Link Solar
- PG7 Waterproof cable gland used for all cable types 2mm² to 6mm² in Dia ,Widely used for solar project when routing the cables
- Suitable for most round cables for Solar Panel,DC power, Aerial, satellite, Air conditioning, Lighting etc
- Can be fixed with Glue (not included) Sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws (not included) depending on position and sealing requirements etc
- The whole set is within 1 ABS white box, 2 cable glands ,2 rubber seals
- An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc
|Signstek Y Branch MC4 Parallel Connector Adapter M/FF and F/MM (1)
Lowest new price: $8.99
List price: $29.00
Signstek Y branch MC4 parallel connectors including one male two female and two male one female, which is designed to connect solar panels between solar panels and extension.
Insulation material:TPE PPOv
Typical contact resistance:≤5mΩ
Contact material:Copper,Tin plated
Degree of protection:IP67
Ambient temperature range:-40℃ until+85℃
- Y Branch MC4 parallel Connectors(1M2F and 2M1F). Suitable for PV system.
- It does not need extra instruments for the removal of plugs and removal will not cause any harm to plugs.
- The cable connection adopts means of rivet and lock.
- With excellent aging resistance and UV endurance, it can be used in harsh environment.
- Fast shipping directly from US warehouse
|ECO-WORTHY 5 Pairs MC4 Connector Male/Female Solar Panel Cable Connectors
Lowest new price: $5.18
List price: $5.18
Rated Voltage: DC 1000V
Rated current: 16A
Ambient Temperature: -40℃~+85℃
Protection Class: Class A
Protection Degree: IP65
Rated connecting capacity :4mm² /6mm²
5 Pairs MC4 connectors (5pcs MC4 Male and 5pcs MC4 Female)
- 5 pairs MC4 solar panel cable connectors (5pcs MC4 Male and 5pcs MC4 Female).
- Quick & simple assembly processing.
- Adopt tight-hoop connection of cable.
- Fastness of male and female points with stable self-locking system which is easy to lock and open.
- With the capacity of anti-aging and resistance to ultraviolet radiation on the outer cover.
|Suaoki 50W 18V 12V Solar Panel Charger SunPower Cell Ultra Thin Flexible with MC4 Connector Charging for RV Boat Cabin Tent Car(Compatibility with 18V and Below Devices)
Lowest new price: $89.99
Lowest used price: $76.49
List price: $189.99
Get 50% More in Power with Suaoki
Suaoki's Semi-Flexible Solar Panel utilizes SunPower Solar cell with a high efficiency conversion rate of up to 25% and generates 50% more power in the same amount of space than traditional glass and aluminum models. SunPower cells also maximize the use of available sunlight by exposing the entire front surface of the cell to the sun even in low light or extreme heat conditions, giving you the ultimate unparalleled solar energy solution.
Versatile Application Anywhere
The bendable Solar Panel can contour and flex in an arc against curved areas to a maximum of 30 degrees. Mount it with the 4 corrosion-proof metal mounting holes on a rooftop, RV, boat, cabin, tent or any other irregular surface, making it perfect for home, travel, camping, and hiking.
Easy to Install and Transport
The flexibility of this panel makes it ideal for storage in tight spaces or crowded areas. This solar panel packs 50W of power, but it only weighs a mere 2.6lbs, making it easier to transport, hang and install.
Max Power (Pmax): 50W（+/-5%
Rated Voltage (Vmp): 17.8V
Rated Current (Imp): 2.84A
Open Circuit Voltage (Voc): 21.6V
Short Circuit Current (Isc): 5.97A
Max System Voltage: 600V
Working Temperature: -40ºF-185ºF
Standard Test Condition: AM1.5,1000W/M²,77ºF
Weight: 2.6 lbs.
Dimension: 23.5 x 22.4 x 0.1 in in
1x Solar Panel
- SUNPOWER SOLAR CELL: Suaoki utilizes SunPower Solar Cell with a higher-than-average 23% to 25% efficiency and an internal blocking diode which prevents reverse current drain at night
- SUPERIOR DURABILITY: the water resistant semi-flexible solar panel is ultra durable and ideal for RVs, boats, tight spaces, or crowded areas that are typically off limits for traditional glass and aluminum models
- BENDABLE PANEL: the panel can be gently flexed to follow a smooth curve of 30 degrees max, and can be mounted on a coach roof, RV, boat, cabin, tent, or any other irregular surface
- POWERFUL AND LIGHTWEIGHT: this solar panel packs 50W of power yet is only 0.1 in thick and weighs only 2.6 lbs., making it easier to transport, hang, and remove
- EASY INSTALLATION: unique frameless design features 4 metal reinforced mounting holes at each corner for fixing screws and for easy installation
|10 Watt Solar Panel Kit (FM123) for Mighty Mule Automatic Gate Openers
Lowest new price: $104.00
Lowest used price: $88.40
List price: $129.00
Brand: Mighty Mule
- The 10 Watt Solar Panel Kit is an excellent option to use as an alternative source that allows for increased power that maximizes sunlight for increased usage for your Mighty Mule or GTO/Pro Automatic Gate Opener.
- 30% Residential Energy Efficient Property Tax Credit! Residential home owners can use this as credit on an operator system, accessories and installation.
- Increases your savings on your electric bill and can increase your property value.
- For gates that lack a power source at the site of installation, rated for 8 - 26 cycles, see zone chart.
- Easy DIY (Do It Yourself) installation.
- Backed by a 12 month Mighty Mule Warranty and Technical Support.
Page 4 of 467
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.