Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Tools

PTO Generators


SmartGen HGM6320T Generator controller, Suitable for communiation base station

SmartGen HGM6320T Generator controller, Suitable for communiation base station Lowest new price: $635.00
List price: $635.00
Brand: SMARTGEN
Model: HGM6320T

HGM6320T automatic control module is specially designed for mobile communication base station, whose functions can be configured according to actual using of the station. It can not only control types of generators automatically, but can monitor temperature of engine room and battery voltage to control mains/load, and mains/double ATS switch. When alarm occurs, it can inform the servicing staff by sending short message.

HGM6320T controller adopts large liquid crystal display (LCD) and selectable Chinese and English interface with compact structure, advanced circuits, simple connections and high reliability.

Performance and characteristics
- Microprocessor control, big screen LCD with back-lit display, selectable Chinese and English interface, touch button operation;
- Precise measure and display function: almost can monitor all the related electricity parameter and water temperature, oil pressure, fuel level and so on;
- With SMS function (can send message about mains normal/ abnormal, gensent start/stop, powering failure, ATS transfer timer to 5 cell phones, and phone number can be set);
- 4 conditions of crank disconnect: mains abnormal signal, remote start signal, room temperature and battery voltage. These 4 conditions can be combined randomly;
- External connect to temperature sensor for monitoring room temperature. Air condition in the test room will be started when temperature is high;
- Can control 2 ATS, and mains have priority;
- Can set a regular time in each month or each week to startup or shutdown;
- With function of prohibiting start at night;
- With international standard MODBUS communication protocol, and RS232/RS485 communication interface, can realized functions of remote control, remote measure, and remote communication of genset;
- Can control room fans automatically;
- With access detection, which ensure the safety of engine room;

Features:

  • controller adopts large liquid crystal display
  • Microprocessor control, big screen LCD with back-lit display
  • Can control 2 ATS, and mains have priority
  • With function of prohibiting start at night
  • Can control room fans automatically


SmartGen LA16 Marine Engine Controller, With 16 programmble lamps, CCS

SmartGen LA16 Marine Engine Controller, With 16 programmble lamps, CCS Lowest new price: $358.00
List price: $358.00
Brand: SMARTGEN
Model: LA16

LED lamp expansion module is a LED display module which has 16 programmable lamp and there are 3 kinds of color (red, green, yellow) can be chosen. The data collected by LA16 are transmitted to the HMC9000 controller for processing via CANBUS port.

TECHNICAL PARAMETERS
Working Voltage: DC18.0V - 35.0V continuous power supply
Power Consumption: <5W
Case Dimension: 240mm x 172mm x 57mm
Cutout: 214mm x 160mm
Working Conditions:Temp.: (-25 - +70)°C  Humidity: (20-93)%RH
Storage Conditions: Temp.: (-25 - +70)°C
Weight: 0.60kg

Features:

  • LED lamp expansion module
  • LED display module which has 16 programmable lamp
  • there are 3 kinds of color (red, green, yellow) can be chosen
  • controller for processing via CANBUS port
  • DC18.0V - 35.0V continuous power supply


SmartGen AIN16-M01 Marine Engine Controller, Analog Misc Module

SmartGen AIN16-M01 Marine Engine Controller, Analog Misc Module Lowest new price: $993.00
List price: $993.00
Brand: SMARTGEN
Model: AIN16-M01

AIN16-M01 analog integrated module contains 8 PT100 sensor input channels, 3 speed input channels, 4 4-20mA output channels and one 4-20mA input channel. The data are transmitted to the HMC9000 controller for processing via CANBUS port, then HMC9000 transfers 4-20mA data back into AIN16-M01 module via CANBUS port and AIN16-M01 outputs corresponding 4-20mA signals. Values can be set for each sensor via HMC9000 controller as demands.

PERFORMANCE AND CHARACTERISTICS
- 32-bit ARM micro-processor with high integration of hardware and more reliable;
- Must be used with HMC9000 together;
- CANBUS communication baud rate can be set as 250kbps or 125kbps via dial switch;
- Module address can be set as 1 or 2;
- Widely power supply range DC(18-35)V, suitable to different starting battery voltage environment;
- 35mm rail mounting type;
- Modular design, pluggable terminal, compact structure with easy installation.

Features:

  • analog input module is an expansion module
  • 18 analog input channels and each channel
  • 4mA - 20mA current sensor input
  • CANBUS communication baud rate can be set
  • Modular design, pluggable terminal, compact structure with easy installation


SmartGen HLS300 Marine Engine Controller, Power Share Module

SmartGen HLS300 Marine Engine Controller, Power Share Module Lowest new price: $555.00
List price: $555.00
Brand: SMARTGEN
Model: HLS300

HLS300 Power Share Module is special design for genset power share. On the basis of the parameters, the module automatically shares power in genset running process.

The main function of HLS300 module is to share active load to each operating genset according to genset capacitance. The module is brief to operate, easy to install and widely used for ship genset and land genset.

PERFORMANCE AND CHARACTERISTICS
- Suitable for 3-phase 3-wire, single phase 2-wire systems with frequency 50/60/Hz;
- Adjustable potentiometer allows for set main parameters of power share;
- The operating parameters can be set via upper computer test software. LINK port should be connected to upper computer via SG72 module (USB to LINK);
- 8 relays output, 2 relays are used for INCR., DECR., 5 relays are used for -P, UNLOADING, P>80%, P<20%, LOW-P output, 1 relay is used for C/B OPEN;
- 1 FIXLOAD mode, 1 UNL, 1 close and 1 60Hz optional digital input;
- One test button, test relay output and panel indicators;
- Widely power supply range DC(8-35)V, suitable to different starting battery voltage environment;
- 35mm guide rail mounting;
- Modular design, pluggable terminal, compact structure with easy installation.

Features:

  • Power Share Module
  • special design for genset power share
  • On the basis of the parameters, the module automatically shares power in genset running process
  • module is to share active load to each operating genset according to genset capacitance
  • The module is brief to operate, easy to install and widely used for ship genset and land genset


SmartGen DIN16A digital input module

SmartGen DIN16A digital input module Lowest new price: $3,573.00
List price: $3,573.00
Brand: SMARTGEN
Model: DIN16A

DIN16A digital input module is an expansion module which has 16 auxiliary digital input channels and the name of each channel can be defined by users. The input port status collected by DIN16A is transmitted to the HMC9000S controller for processing via CANBUS port.

TECHNICAL PARAMETER
Working Voltage DC18.0V - DC35.0V continuous power supply
Power Consumption <2W
Case Dimension 107.6mm x 89.7mm x 60.7mm
Working Conditions Temp.: (-25 - +70)°C  Humidity: (20-93)%RH
Storage Conditions Temp.: (-25 - +70)°C
Weight 0.25kg

Features:

  • digital input module is an expansion module
  • 16 auxiliary digital input channels
  • name of each channel can be defined by users
  • controller for processing via CANBUS port
  • Working Voltage DC18.0V - DC35.0V continuous power supply


SmartGen HMC4000MPU Marine Genset Control Module + RS485

SmartGen HMC4000MPU Marine Genset Control Module + RS485 Lowest new price: $238.00
List price: $238.00
Brand: SMARTGEN
Model: HMC4000MPU

HMC4000N marine genset controller integrate digitization, intelligentization and network technology which are used for genset automation and monitor control system of single unit to achieve remote start/stop, data measurement, alarm protection and etc. functions. It fit with LCD display, optional languages interface (Chinese and English), and it is reliable and easy to use.

HMC4000N marine genset controller adopt micro-processor technology with precision parameters measuring, fixed value adjustment, time setting and set value adjusting and etc. All parameters can be configured from front panel or through USB interface via PC. It can be widely used in all types of marine genset control automation system with compact structure, advanced circuits, simple connections and high reliability.

Main features as follows:
- 132x64 LCD with backlight, selectable language interface (Chinese and English), push-button operation;
- Hard-screen acrylic material been used to protect screen with great wear-resisting and scratch-resisting functions;
- Silicone panel and pushbuttons can be used in extreme temperature environment;
- Equipped with CANBUS port and can communicate with J1939 gen-set;
- RS485 communication interface can connect with remote control modules. In remote control mode, it is easy and convenient to remote control engine start/stop(local start/stop keys are deactivated);
- With override mode: in this mode, only over speed shutdown and emergency shutdown can stop the engine.;
- Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with voltage 120V/240V and frequency 50Hz/60Hz;
- Collects and shows 3-phase voltage, 3-phase current, power parameter and frequency of generator.

Features:

  • marine genset controller integrate digitization
  • intelligentization and network technology
  • genset automation and monitor control system
  • achieve remote start/stop
  • data measurement, alarm protection


SmartGen HGM8110CAN Generator controller, VFD+RS485+ETHERNET+GSM+J1939

SmartGen HGM8110CAN Generator controller, VFD+RS485+ETHERNET+GSM+J1939 Lowest new price: $1,190.00
List price: $1,190.00
Brand: SMARTGEN
Model: HGM8110CAN

HGM8100N series genset controllers are especially designed for extremely high/low temperature environment (-40 - +70°C). The controllers can operate reliability in extreme temperature conditions with the help of VFD display or LCD and the components that resist extreme temperature. Controller has strong ability of anti-electromagnetic interference, can be used under complex electromagnetic interference environment. It is easy to maintain and upgrade due to the plug-in terminal. All display information is Chinese (also can be set as English or other languages).

HGM8100N series genset controllers integrate digitization, intelligentization and network technology which are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measure, alarm protection and "three remote" functions(remote control, remote measuring and remote communication).

HGM8100N series genset controllers adopt 32-bit micro-processor technology with precision parameters measuring, fixed value adjustment, time setting and set value adjusting and etc. Majority parameters can be configured from front panel, and all parameters can be configured by PC via RS485 interface or ETHERNET to adjust and monitor. It can be widely used in all types of automatic genset control system with compact structure, advanced circuits, simple connections and high reliability.

HGM8110N: used for single automation systems. Control genset start/stop through remote signals control.

HGM8120N: AMF (Auto Mains Failure), updates based on HGM8110N, moreover, has mains electric quantity monitoring and mains/generator automatic transfer control function, especially for automatic system composed by generator and mains.

Features:

  • genset controllers are especially designed for extremely high/low temperature environment
  • genset controllers integrate digitization
  • genset controllers adopt 32-bit micro-processor technology with precision parameters measuring
  • remote control, remote measuring and remote communication
  • especially for automatic system composed by generator and mains


SmartGen HGM6110N Generator controller, Single unit automation + remote signal start/stop

SmartGen HGM6110N Generator controller, Single unit automation + remote signal start/stop Lowest new price: $288.00
List price: $288.00
Brand: SMARTGEN
Model: HGM6110N

HGM6100N series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three "remote" (remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French with easy and reliable operation.

HGM6100N series automatic controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc.. All the parameters can be configured from front panel or use USB interface (or RS485 interface) to adjust via PC. It can be widely used in all types of automatic control system for its compact structure, simple connections and high reliability.

PERFORMANCE AND CHARACTERISTICS

HGM6100N controller has six variants:

HGM6110N/6110NC/6110CAN: Automatic Start Module, it controls generator to start/stop by remote start signal;
HGM6120N/6120NC/6120CAN: Based on HGM6110N/6110NC/6110CAN, it adds mains AC monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset.

Note1: HGM6110NC/6120NC has RS485 port, HGM6110N/6120N without. HGM6110CAN/6120CAN has CAN port, HGM6110N/6120N and HGM6110NC/6120NC without.

Note2: HGM6110/6120 is taken as an example to describe in this manual.
- 132*64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;
- Acrylic screen, improved wearable and scratch resistance property;
- Silica-gel panel and keys can well adapt to higher and lower temperature;
- With RS485 communication port, can achieve "three remote" functions via MODBUS protocol;

Features:

  • Automatic Start Module, it controls generator to start/stop by remote start signal
  • Especially suitable for the automation system composed by mains and genset
  • 132*64 LCD display with backlight, optional language interface, push-button operation
  • Acrylic screen, improved wearable and scratch resistance property
  • Silica-gel panel and keys can well adapt to higher and lower temperature


SmartGen HVD300 Voltage Detection Module

SmartGen HVD300 Voltage Detection Module Lowest new price: $198.00
List price: $198.00
Brand: SMARTGEN
Model: HVD300

HVD300 voltage detection relay is widely used in marine genset field and land genset field.

HVD300 voltage detection relay detects over voltage, under voltage, loss of phase, phase sequence wrong and other abnormal condition accurately and the corresponding relay will act when abnormal conditions occur.

PERFORMANCE AND CHARACTERISTICS:

1. Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with frequency 50/60/400Hz;
2. Detect 3-phase voltage and phase sequence accurately;
3. With over voltage, under voltage, loss of phase and reverse phase sequence protection function;
4. Adjustable potentiometer allows for set value adjusting and delay value setting;
5. 2 relay output;
6. One test button, test over/under voltage relay and indicator;
7. Widely power supply range DC (8-35)V, suitable to different starting battery voltage environment;
8. 35mm guide rail mounting;
9. Modular design, pluggable terminal, compact structure with easy installation.

Features:

  • voltage detection relay
  • widely used in marine genset field and land genset field
  • detects over voltage
  • under voltage, loss of phase
  • phase sequence wrong and other abnormal condition accurately


SmartGen HGM8110V Generator controller, VFD+RS485+GSM

SmartGen HGM8110V Generator controller, VFD+RS485+GSM Lowest new price: $1,110.00
List price: $1,110.00
Brand: SMARTGEN
Model: HGM8110V

HGM8100N series genset controllers are especially designed for extremely high/low temperature environment (-40 - +70°C). The controllers can operate reliability in extreme temperature conditions with the help of VFD display or LCD and the components that resist extreme temperature. Controller has strong ability of anti-electromagnetic interference, can be used under complex electromagnetic interference environment. It is easy to maintain and upgrade due to the plug-in terminal. All display information is Chinese (also can be set as English or other languages).

HGM8100N series genset controllers integrate digitization, intelligentization and network technology which are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measure, alarm protection and "three remote" functions(remote control, remote measuring and remote communication).

HGM8100N series genset controllers adopt 32-bit micro-processor technology with precision parameters measuring, fixed value adjustment, time setting and set value adjusting and etc. Majority parameters can be configured from front panel, and all parameters can be configured by PC via RS485 interface or ETHERNET to adjust and monitor. It can be widely used in all types of automatic genset control system with compact structure, advanced circuits, simple connections and high reliability.

HGM8110N: used for single automation systems. Control genset start/stop through remote signals control.

HGM8120N: AMF (Auto Mains Failure), updates based on HGM8110N, moreover, has mains electric quantity monitoring and mains/generator automatic transfer control function, especially for automatic system composed by generator and mains.

Features:

  • genset controllers are especially designed for extremely high/low temperature environment
  • genset controllers integrate digitization
  • genset controllers adopt 32-bit micro-processor technology with precision parameters measuring
  • remote control, remote measuring and remote communication
  • especially for automatic system composed by generator and mains


<< Prev   Next >>
Page 4 of 14

[Kindle]    [Kindle DX]
  Privacy Policy

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.