|Browse by Catagory:
Job Site Office
Pool & Deck Repair Producs
Slides, Ladders & Diving Boards
|DEWALT DW1587 6 Bit 3/8-Inch to 1-Inch Spade Drill Bit Assortment
Lowest new price: $8.99
List price: $10.24
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
The DEWALT DW1587 6 Bit 3/8-Inch to 1-Inch Spade Drill Bit Assortment includes six commonly used high-performance drill bits to complement your tool set. The set features the Max Life corner that preserves nail life, the Extreme Speed Channel for efficient chip removal, and a 1/4-inch ball groove shank for quick bit changes. DEWALT spade bits are designed with heavy-duty shanks for extended life and durability.
- The product is 6PC Spade Bit Set
- Easy to use
- The product is manufactured in China
- Spade drill bit set includes six common sizes for versatility
- Max Life corner preserves nail life
- 1/4-inch ball groove shank is compatible with most drills
- Measures 8.8-by-5.9-by-0.2 inches; weighs 9.3 ounces
- Included sizes 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch, 7/8-inch, and 1-inch drill bits
|Ridgid VF5000 - 3-Layer Pleated Paper Vacuum Filter
Lowest new price: $19.76
Lowest used price: $15.79
List price: $25.95
The RIDGID VF5000 3-layer Pleated Vacuum Filter is designed to take on fine particles with its double-pleated design. Easily filter sawdust, dirt from basement or garage, drywall dust, cement dust, cold ashes from fireplaces or grills, and fine powders such as flour, talcum, and chalk. The 3-layer filter material is 99% efficient down to 1 micron to ensure a well done cleanup. A greater surface area is used to resist clogging and installation is made easy with the QwikLock technology and integrated filter plate. Easily reuse this filter by cleaning it with water. Use this filter with your favorite 5-20 gallon RIDGID wet/dry vacuum or 6-9 gallon HUSKY vacuums.
- One authentic OEM RIDGID 3-layer filter (OEM Genuine Ridgid Product)
- Fits all 5-20 gallon RIDGID vacuums
- Eliminate fine dust, dirt, sawdust, cold ashes, fine powders
- Wash and reuse with water
- QwikLock technology for easy filter changing
|Shop-Vac 9067100 High Efficiency Collection Filter Bags, 5 8gal (Pack of 2)
Lowest new price: $9.53
Lowest used price: $9.99
List price: $13.59
2 Pack, 5 To 8 Gallon Drywall Collection Filter Bag, Fits 5 To 8 Gallon Vacs, For Dry Debris Pick Up, Great For Fine Dust To Debris Pick Up, Fits TV #'s: 343-913, 343-905, 125-011 and 629-115.
- Fine dust filter bag ideal for pick-up of drywall, cement dust and cold ashes
- Easy to use and install
- Double-walled design
- Includes 2 fine dust filter bags
- Fits 5 to 8-gallon vacuums
- Shop-vac 90304 Cartridge Filter
- Shop-Vac 5989400 8 gallon 6.0 Peak HP Stainless Wet Dry Vacuum, Black
- Shop-Vac 5986000 5-Gallon 4.5 Peak HP Stainless Steel Wet Dry Vacuum
- Shop-Vac 9066100, 3 pieces, 5-8-Gallon Collection Filter Bags
- Shop Vac Filter, Best 90304 Shop-Vac Replacement Hepa Cartridge, Filters, Parts & Accessories for 5 gallon & larger Shop Vacs - Ultramax
- Shop-vac 9010700 Reusable Dry Filter, 3-Count
- Shop-Vac 9058500 Foam Sleeve, Large, Black
- Shop Vac 903-50-00 Ultra Web® Cartridge Filter For Wet Or Dry Pick Up
- Shop-Vac 9039700 Ultra Web Small Cartridge Filter, Type BB
- Shop-Vac 9650610 3.0-Peak Horsepower Right Stuff Wet/Dry Vacuum, 6-Gallon
|Countersink Drill Bit, Baban Countersink Drill Bit Set 6 Pcs 1/4'' Hex Shank HSS 5 Flute Countersink 90 Degree Center Punch Tool Sets For Wood Quick Change Bit 6mm-19mm with A Box(Shop by Moworve)
Lowest new price: $7.99
List price: $12.99
- ✔ Super Quality - These flute countersink drill bit set are machined from high speed steels and are available in 6 different diameter sizes. Size - 6mm(1/4''), 8mm(5/16''), 9mm(3/8''), 12mm(1/2''), 16mm(5/8''), 19mm(3/4'') ●NOTE: the Moworve store is the ONLY ONE who sell this drill bit, and other brands or stores on this link are dishonest sellers.
- ✔ Eliminates Chatter&Vibration - All have a 90° angle on the point for sharp and precise countersinking. The cutting edge is hardened and honed for sharpness. A Chatter-Free,five-flute designed with staggered cutting teeth aranged to insure free chip flow and rapid chatter free cutting.
- ✔ Mutiple Application - Ideal for wooden planks,fiberboard,particle board,plywood,plastic,alumiumn board ,pcb board and more
- ✔ Premium Design - Great for Sinking 90 Degree Holes into Wood and Soft Metals Countersunk Screws and Fixings.Suitable for DIY, Home and General Building/Engineering Using
- ✔ Sweet Tips - 1/4″ hex shank countersinks are fine for a quick drill. They don't slip in drill chucks. You can make deep countersinks easily by setting the countersink's depth stop to allow the countersink to drill more deeply into the worksurface. Be sure to measure the size of your plug to be sure your countersink's body will make the right-size hole. IF you have any problem about the item,please contact us first so that we can help you out.
- TEKTON 6580 Automatic Center Punch
- Center drill bit , Drillpro Doors Self Centering Hinge Tapper Core Drill Bit Set Hole Puncher Woodworking Tools 5/64'' 7/64'' 9/64'' 11/64'' 13/64'' 5mm 1/4''
- 7Pcs Woodworking Countersink Drill Bits Set, Drillpro Woodworking Chamfer, Three-Pointed High-Speed Steel Drill, with a Hex Key Perfect for Wood
- CO-Z 5pcs Hss Cobalt Multiple Hole 50 Sizes Step Drill Bit Set with Aluminum Case
- Forstner Drill Bit, Baban 16Pcs Forstner Bit Set 15mm-35mm Tungsten Steel Woodworking Hole Saw Set Wood Drill Bits Auger Opener Drilling Wood Plastic Plywood with Round Shank
- PORTER-CABLE PC1014 Forstner Bit Set, 14-Piece
- Milescraft 5341 Counter Bit Set, 4-Piece
- Drill Warehouse 5 Pack High Speed Steel HSS Drill Bit Hole Saw Set Stainless Steel Metal Alloy Kit 16mm/18mm/20mm/25mm/30mm- Pack of 5
- Center drill bits，DRILLPRO door Self-centering hinge Hole Opening Drill Bit Set Wood working Tool 5mm,5/64'', 7/64'',9/64'', 11/64'', 13/64'' ,1/4'' .
- RAM-PRO 7-Pc Countersink Drill Bit Set with Stop Collars & Wrench, Perfect for Wood | Quick Change Pre-Drill Counterbore Drill Bits Made for Screw Sizes: # 5,6,7,8,9,10,12.
|DEWALT DCA1820 Dewalt Battery Adapter for 18V Tools, 20V
Lowest new price: $37.99
List price: $66.30
The DEWALT DCA1820 20V MAX Battery Adapter for 18V Tools is compatible with most DEWALT 18V tools and allows for use of 20V MAX compact batteries in most DEWALT 18V tools. This adapter requires use of DEWALT 20V MAX charger, as this adapter will not fit into DEWALT 18V chargers. Battery and charger are sold separately. Use with DCB201, DCB203, DCB203BT compact batteries. Do not use adapter with premium batteries (DCB200, DCB204, DCB204BT, DCB205) in 18V Compact drills DC970, DC759. This Adapter will not work with 20V/60V FLEXVOLT Batteries.Includes: (1) 18V - 20V MAX Adapter.
- Compatible with most DEWALT 18V tools and allows for use of 20V MAX compact batteries
- Requires use of DEWALT 20V MAX charger
- Use with DCB201, DCB203, DCB203BT compact batteries
|3M Wetordry Sandpaper, 9-Inch by 11-Inch, Extra Fine 320 Grit, 5-Sheet, 2-PACK
Lowest new price: $18.99
List price: $18.99
3M(TM) Wetordry(TM) allows you to sand between coats of varnish and paint or other finishes. Can be used with water to reduce clogging and extend abrasive life. Ideal for sanding metal for repainting or prior to primer coat.
- 3M's extensive line of marine sandpaper and masking tape delivers the ultimate in performance for surface preparation
- Specifically designed to perform in the harsh marine environment
- The standard for Wet-or-Dry sandpaper
- 3M quality in every product guarantees the results your boat deserves.
- 600 Wet-Or-Dry Sandpaper 5Pk
- 3M Wetordry Sandpaper, 1000-Grit, 9-Inch by 11-Inch, 5 Sheets
- 3M 32035 Imperial Wetordry 9" x 11" P800 Grit Sheet
- Fandeli 36027 220 Grit Multipurpose Sandpaper Sheets, 9" x 11", 25-Sheet
- 3M 32022 Imperial Wetordry 9" x 11" 1200 Grit Sheet
- Rust-Oleum 7860519 Tub And Tile Refinishing 2-Part Kit, White
- ALI INDUSTRIES 4470 1500 Grit Sandpaper, 9-Inch x 11-Inch, 5 sheets
- TCP Global Gravity Feed Paint Spray Gun Holder Stand with Strainer Holder, Wall or Bench Mount, HVLP
- FoamPRO 164 Fine Finish Roller (High-Density Foam), 4"
- 32OZ WHT Tub/Tile Kit set 0f 2
|Accessory Kit, 17 Piece Compressor Inflation Kit, with Blow Gun, Air Chucks, & Inflation Needles (Campbell Hausfeld MP284701AV)
Lowest new price: $12.09
Lowest used price: $8.67
List price: $11.92
Brand: Campbell Hausfeld
The Campbell Hausfeld 17-piece industrial accessory kit (MP284700AV) is a perfect addition to any air compressor or air tool. This accessory kit includes a blowgun, 5 – 50 PSI gauge, dual-foot chuck, 1/4-inch NPT (F) coupler, (4) 1/4-inch NPT (M) plugs, (2) 1/4-inch NPT (F) plugs, female coupling, (2) male couplings, (2) inflation nozzles, safety nozzle and tapered nozzle. This kit is a must have when tackling any projects involving your compressor. Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert.
- Includes gauge, chuck, 1/4-in. NPT (F) coupler, (4) 1/4-in. NPT (M) plugs, (2) 1/4-in. NPT (F) plugs, female coupling, (2) male couplings, (2) inflation nozzles, safety nozzle & tapered nozzle
- A great starter kit for inflation and tool connection; perfect for a variety of inflation needs and a must have for a new compressor
- Components are made of durable brass meant to handle repetitive use making the MP284700AV very reliable
- Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert
- Air Hose, 25 Foot, 3/8 Inch ID, ¼ Inch NPT (M), PVC, Non-marring, 300 PSI (Campbell Hausfeld, PA117701AV)
- Bostitch BTFP02012 6 Gallon 150 PSI Oil-Free Compressor
- PORTER-CABLE C2002 Oil-Free UMC Pancake Compressor
- Amflo 12-25E Blue 300 PSI Polyurethane Air Hose 1/4" x 25' With 1/4" MNPT Swivel Ends And Bend Restrictor Fittings
- Air Hose with Bend Restrictors, 50 Foot, 3/8 Inch ID, PVC, Non-marring, 300 PSI (Campbell Hausfeld PA121600AV)
- PORTER-CABLE PCFP02003 3.5-Gallon 135 PSI Pancake Compressor
- California Air Tools 5510SE Ultra Quiet and Oil-Free 1.0-HP 5.5-Gallon Steel Tank Air Compressor
- PORTER-CABLE CMB15 150 PSI 1.5 Gallon Oil-Free Fully Shrouded Compressor
- California Air Tools CAT-1P1060S Light & Quiet Portable Air Compressor, Silver
- BOSTITCH U/BTFP02012 6 gallon Pancake Compresso (Certified Refurbished)
|Kreg Tool Company KHI-PULL Cabinet Hardware Jig
Lowest new price: $24.00
Lowest used price: $22.32
List price: $24.99
The Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The movable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. Perfect for new construction and for refreshing entire rooms. The Cabinet Hardware Jig provides a simple solution for the intimidating task of drilling mounting holes for cabinet knobs and pulls. Whether you’re installing one new knob or dozens of drawer pulls, the Jig ensures that you’ll drill accurately and consistently every time, so you get results that exceed your expectations. Whether you’re updating your cabinets or you’re building a project from scratch, adding hardware like knobs and pulls is often one of the final steps—and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. The Cabinet Hardware Jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you’ll know that every piece of hardware is positioned correctly and consistently. The Cabinet Hardware Jig features moveable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. A moveable edge guide and built-in measuring scales (in imperial and metric) ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one. The Cabinet Hardware Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need is a drill and a 3/16", bit, and the ability to set the jig to match your hardware and the position where you want it to go. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you’ll get straight, accurate holes— whether you’re drilling one, a few, or hundreds.
- Install Knobs and Pulls the Worry-Free Way - with Easy, Repeatable Accuracy
- Adjustable guides for accurate hole placement
- Built-in measuring scales for repeatable results
- Versatile for mounting single and multi-hole knobs
- Adjustable edge guide for easy positioning
|Tacklife RTD35ACL Advanced Multi-functional Rotary Tool Kit with 80 Accessories and 3 Attachments Variable Speed for Around-the-House and Crafting Projects
Lowest new price: $37.97
List price: $75.99
Tacklife - Professional team on Amazon, which deals only with development of the tools. We commit ourselves to using qualitative tools to improve the quality of life.
►Flex Shaft : improves level of versatility to your project capabilities.
►Cutting guide and Multipurpose cutting bit: hollows any shape on wood.
►Auxiliary Handle: makes holding more firmly, available to tackle elaborate project.
►Variable speed wheel located on the top lets you change the speed freely while using the tool.
►Lightweight build makes intricate designs to easily execute, allowing you to carve small and complex designs.
►Protection class: Double insulation
Warm Tips For Usage:
1.Spindle Lock:Please DO NOT use the spindle lock after switched on and driving in high speed rotation, because the functional structure inside the spindle would broke
(the chuck might fly if situation is serious) If used, it might lead to injury and problems in later operation like unable to hold down the spindle lock and screw tightly, or sliding.
Please use the Spanner to tighten when using and DO NOT tighten the chuck too strong to lock the spindle.
2.Flex shaft:Please MUST keep the rotation speed reaching at around 2.3W( corresponding to 4 dial ) when using to avoid possible problems of great shock and hemp phenomenon if driving in low RPM.
Please keep the shaft NOT be knotted or in a large angle bending. Or it will lead to increased vibration of handle and the shaft can not be used anymore.
1 * Tacklife Rotary Tool
1 * Knit box
1 * Accessory Case
1 * 80-piece Accessory
3 * Attachments
1 * Tacklife Instruction Manual
1* 24 Months Guarantee
- ▲VERSATILE ACCESSORIES - Comes with 80 accessories and 3 attachments, Flex Shaft is for versatility of your project capabilities; Cutting guide and Multipurpose cutting bit is for hollowing any shape on wood; Auxiliary Handle provides stability to tackle precise projects
- ▲ADJUSTABLE ROTATION SPEED AND ONBOARD SPINDLE LOCK - Speed from 10,000 rpm to 3,2000 rpm lets you set and adjust speed flexibly according to the work contents and the type of materials being used; Spindle lock makes for quick and easy bit changes
- ▲HANDY AND COMFORTABLE GRIP - Rubber overmolded grips provide superior comfort and control to help you maintain a better control; Held like a pen for precision work, held like a hammer for rough work, makes you work better and less fatigue
- ▲WIDE APPLICATION - You can cut, sand, grind, carve, polish, engrave, sharpen, drill or smooth workpieces for any home improvement or crafting job you can dream up; Not only ideal for building some Christmas decorations, but also is nice for thanksgiving gifts and christmas gifts
- ▲PACKAGE CONTENTS - Rotary Tool; Knit Box; Accessory Case; 80 Accessories; 3 Attachments (Cutting Guide, Auxiliary Handle,Flexible Driver); User Manual; 24 Months Guarantee(Accessories not included)
- Tacklife ARTO1C 150-Piece Rotary Tool Accessories Kit 1/8-inch Diameter Shanks Universal Fitment for Easy Cutting, Grinding, Sanding, Sharpening, Carving and Polishing
- Tacklife RTXA35 238-Piece Rotary Tool Accessories Kit in a Wooden Case 1/8-inch Shanks for Most Rotary Tools
- Dremel 4486 MultiPro Keyless Chuck
- WORKPRO 276-piece Rotary Tool Accessories Kit Universal Fitment for Easy Cutting, Carving and Polishing
- Tonsiki 20pcs Tungsten Carbide Rotary Burr Set with 1/8" Shank for DIY Woodworking, Carving, Engraving, Drilling
- SPTA QA0301 10Pcs HSS Router Carbide Engraving Bits & 5Pcs Drill Bit-1/8"(3mm) Shank For Proxxon Dremel Rotary Tools for DIY Woodworking, Carving, Engraving, Drilling
- YXGOOD 10 Pieces Tungsten Carbide Double Cut Rotary Burr Set with 3 mm (1/8 Inch) Shank and 6 mm (1/4 Inch) Head Size
- SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
- ZFE 217 Piece Rotary Tool Accessory Set - Fits Dremel - Grinding, Sanding, Polishing
- WEN 3920 16-Inch Two-Direction Variable Speed Scroll Saw with Flexible LED Light
|Fontic 11pcs 3"/80mm Compound Drill Buffing Sponge Pads Kit for Car Sanding, Polishing, Waxing, Sealing Glaze (9 Polishing Pads+1 Woolen Buffer+1 Thread Drill Adapter with Shank)
Lowest new price: $7.99
List price: $16.98
Kindly Note: 3.15*0.83 inches
Any problem,please email us first,we will take responsibility and Please look for the FONTIC store to buy genuine FBA shipments
Material: Foam and Woolen
Size: 3 inch(80mm)
Color: Black, Yellow, Blue, Orange, White
Suitable for: Waxing, Polishing, Sealing Glaze
Black (Extra Fine) - Polishing and Finishing Pad, provides a rich swirl-free high gloss finish.
Yellow (Medium) - Light Cut & Polishing Pad, final cutting, polishing or glazing clear coat surfaces. Blue (Medium) - Light Cut & Polishing Pad, final cutting, polishing or glazing clear coat surfaces.
Orange (Coarse) - Foam Polish Pad Standard Grade Cutting Pad, excellent for enamels, acrylics and urethane.
White (Extra Fine) - Polishing and Finishing Pad, provides a rich swirl-free high gloss finish.
This is a car polish and polishing kit. It comes with 9 foam buffing polishing pads, 1 woolen buffer, and 1 thread drill adapter with shank. They come with everything you need to polish your car so you don't have to go get something to go with it.
1 x 3"(80mm) Adhesive Backer Pad
1 x 3"(80mm) Woolen Buffer
1 x 3"(80mm) Orange Hard Polishing Pad
1 x 3"(80mm) Orange Hard Flat Polishing Pad
1 x 3"(80mm) Blue Medium Hard Polishing Pad
1 x 3"(80mm) Yellow Soft Flat Polishing Pad
1 x 3"(80mm) Yellow Soft Waffle Polishing Pad
1 x 3"(80mm) Black Waffle Soft Buff Polishing Pad
1 x 3"(80mm) Black Flat Soft Polishing Pad
1 x 3"(80mm) Woolen Polishing Pad
1 x 0.3"& 0.34'' M10 Drill Adapter with Shank
- Size: 3.15*0.83 inches,With 9 pads, 1 woolen buffer, 1 thread drill adapter with shank,Please look for the FONTIC store to buy genuine FBA shipments
- Used for all kinds of coat paints's waxing, polishing and sealing glaze, to clean and improve their lightness; used for auto car detail polishing
- Professional wool and foam pad buffing, polishing and finishing system
- Top quality drill adaptor for connect the electric drill
- Sponges with different colors and softness, suitable for polishing rough and small areas
Page 4 of 5948
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.