|Browse by Catagory:
Job Site Office
Pool & Deck Repair Producs
Slides, Ladders & Diving Boards
|Ryobi P506 One+ Lithium Ion 18V 5 1/2 Inch 4,700 RPM Cordless Circular Saw with Laser Guide and Carbide-Tipped Blade (Battery Not Included, Power Tool Only)
Lowest new price: $41.59
Lowest used price: $24.49
List price: $41.73
For almost every job, you'll need a reliable circular saw if you're working with wood. The Ryobi P506 is a powerful piece of machinery that combines portability, accuracy, and power. It can rip through most woods at 4,600 revolutions per minute. First, it has a rubberized overgrip that lets you hold this in most weather conditions. The blade is located on the left side to improve that control, along with an extra handle that lets you guide this smoothly. Most helpful is the laser guide that projects a red beam in front of the tool that shows you where you're about to go. This piece is fully adjustable, too, letting you adjust your bevel from 0 to 50 degrees and your depth up to 1 9/16 inches. On top of that, it's a part of the One+ collection, so there is a huge collection of batteries in all kinds of price ranges that will work with this. Few pieces compare to the attention to detail Ryobi's put into this product. Everything fits together to bring you an accurate and powerful sawing experience. Ryobi does DIY right.
- EASY GRIP: Rubber overmold makes it easy for you to grip and control this tool, even in slippery conditions
- LASER GUIDE: The tool generates a red line on the work surface in front of the saw upon the tool's activation, letting you see where you're working
- ADJUSTMENT: Easy-access knobs let you adjust your depth up to 1 9/16 inches and your beveling angle from 0 to 50 degrees
- ONE+ COMPATIBLE: This tool is compatible with many Ryobi battery, including the P100, P101, P102, P103, P104, P105, P107, and P108
- INCLUDED BLADE AND BLADE WRENCH: A 5 1/2 inch blade, tipped with carbide to reduce corrosion and wear, is included. The wrench used to remove the blade is included in a slot on the tool
|Bare-Tool Milwaukee 2420-20 Bare-Tool 12-Volt Hackzall Saw (Tool Only, No Battery)
Lowest new price: $66.35
Lowest used price: $50.00
List price: $66.35
M12 HACKZALL. The product is easy to use. The product is durable. The product is manufactured in China.
- The product is easy to use
- The product is durable
- The product is manufactured in China
- 12-volt lithium-ion battery offers longer run-time and fade-free performance
- Keyless Quik-Lok blade clamp allows for quick and easy blade changes and all-metal gear case for added durability
- Variable speed trigger for increased user control
- Battery fuel gauge displays remaining run-time and built-In LED light illuminates work surface
- Accepts both Hackzall and Sawzall style blades
|Makita XSS02Z 18V LXT Lithium-Ion Cordless Circular Saw, 6-1/2-Inch, Tool Only
Lowest new price: $99.00
Lowest used price: $85.00
List price: $119.00
The Makita 18V LXT Lithium-Ion Cordless 6-1/2" Circular Saw delivers cordless cutting power to the job site. The XSS02Z (tool only) has a Makita-built high-torque motor and a compact design for a range of cutting applications, and will cut 2X material at 45 degrees. The Makita-built high torque motor produces 3,700 RPM for faster cutting. The heavy gauge, precision machined base is engineered for smooth, accurate cutting and added durability in harsh job site conditions.
- 2-1/4" Maximum Cutting Capacity
- Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood
- Heavy gauge, precision machined base for smooth, accurate cutting and added durability
- 50Degree maximum bevel cutting capacity
- Weighs only 7.3 lbs. with battery (battery not included) for reduced operator fatigue
|DEWALT DCS391B 20-Volt MAX Li-Ion Circular Saw, Tool Only
Lowest new price: $119.00
List price: $139.00
The DEWALT DCS391B 20V MAX 6-1/2" Circular Saw features a powerful 460 MWO, 5250 RPM motor that delivers power and speed to make the most demanding cuts with ease. A high strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy, and an optimized rubber overmolded comfort grip delivers optimal balance and control. The 0Degree-50Degree bevel capacity allows for aggressive bevel cuts for a multitude of applications, along with the 6-1/2" carbide tipped blade for cutting 2x material at 90Degree and 45Degree and more cuts per charge. No load speed: 5250 rpm, Arbor size: 5/8", Depth of cut at 45Degree: 1-5/8", Depth of cut at 90Degree: 2-1/4". Includes: DCS391 6-1/2" Circular Saw, 6-1/2" Carbide-tipped Blade. This is a bare tool item (battery sold separately).
- Powerful 460 MWO, 5,150 RPM motor delivers power and speed to make the most demanding cuts with ease
- High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy
- 0-50°(degree) bevel capacity allows for aggressive bevel cuts for a multitude of applications
- Optimized rubber overmolded comfort grip delivers optimal balance and control; Power Tool Type: Cordless
- 6.5-Inch carbide-tipped blade for cutting 2 times material at 90° and 45° and more cuts per charge
- Includes: DCS391 6.5-Inch Circular Saw and 6-.5-Inch Carbide-tipped Blade
|DEWALT DCS387B 20-volt MAX Compact Reciprocating Saw (tool only).
Lowest new price: $106.08
Lowest used price: $147.79
List price: $106.08
The DEWALT DCS387B 20V MAX Compact Reciprocating Saw boasts of a compact and lightweight design at only 14.5" in total length; fits between studs and allows users to make cuts in confined spaces. It features a 4-position blade clamp that allows for flush cutting and increased positional versatility with tool free blade changes. The 1-1/8" stroke length delivers faster cutting speed, and a variable speed trigger with 0-2,900 spm provides increased blade control for precision cuts. The pivoting shoe provides increased versatility while cutting. It also offers a bright LED light illuminates dark work areas for better visibility. This is a baretool item - battery sold separately.
- Compact and lightweight design
- fits between studs and allows users to make cuts in confined spaces
- 4-Position Blade Clamp allows for flush cutting
- 1-1/8" stroke length delivers faster cutting speed
- Variable Speed Trigger with 0-2,900 spm
|Black & Decker BDCD8PK Drill Project Kit, 8V
Lowest new price: $48.79
Lowest used price: $42.45
List price: $59.99
The BLACK+DECKER BDCD8PK 8V MAX Drill Project Kit is great for everyday household tasks and projects. This tool kit features an 8V MAX cordless lithium drill and 54 hand tools and accessories most commonly used for your DIY projects. (Over $100 value!). Includes a convenient carrying case for storage and portability. Includes: 8V MAX Lithium Drill, Tool Bag, Claw Hammer, Tape Measure, Adjustable Wrench, Slip Joint Pliers, Ratcheting Screwdriver, Utility Knife, Assorted Nut Drivers, Assorted Screwdriving Bits, Assorted Drill Bits.
- 8V MAX cordless lithium drill
- 54 hand tools and accessories
- Convenient carrying case for storage and portability
- Household Assortment Kit, Cup Hooks, Picture Hangers, Push Pins, Thumb Tacks, Brads, Plastic Anchors, Screws and Nails, 360 Pieces.
- 550 Pieces Nail and Brad Assortment 7 Different Sizes!
- CH Hanson 03040 Magnetic Stud Finder
- Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces
- ARROW 160455 Drywall Drill Bit, Screw and Anchor Kit
- Akribos XXIV Women's Quartz Rose-Tone Case with Rose-Tone Accented Silver Sunray Dial on White Glove Style Genuine Leather Strap Watch AK921WT
- ARROW 160386 Kitchen Drawer Assortment, 513 Pieces
- Picture Hanging Kit Asst
- The Hillman Group 121130 Extra Heavy Mirror Kit
- Little Tikes Big Car Carrier
|Pink Power PP182 18V Cordless Electric Drill Driver Set for Women - Tool Case, 18 Volt Drill, Charger and 2 Batteries
Lowest new price: $59.99
List price: $59.99
Brand: Pink Power
The Pink Power Cordless 18V NiCad Drill Kit for Women has all the flair you need in a drill without sacrificing the strength. We combined a stand out color, a lightweight design and a high-power motor so you can tackle any project with efficiency and personality. Our upgraded 2017 model has a host of new features that will make any home improvement task easy to accomplish. Our upgraded model has a host of new features that will make any home improvement task easy to accomplish.
Our drill features a built-in bubble level to improve accuracy. It also showcases an LED light that automatically turns on when the trigger is held to help make it easier to work in dark and confined workspaces (such as cabinets, while assembling furniture or when in poorly lit areas). The last feature we added is our new magnetic base that allows you to place loose screws or bits on the tool itself, keeping you hands-free. Weighing in at just under 3.5 pounds with the battery, this tool is light enough to use for long periods of time without wearing you out. The 0-550rpm motor will give you enough power to hang drywall or just hang pictures.
Every Pink Power Cordless Drill Set comes with a full One-Year Warranty And satisfaction guarantee.
- Pink tool kit includes: pink power drill, tool case, battery charger, drill bit set, two NiCad 18V batteries and a one-year warranty.
- Compact cordless drill driver features a built in LED light that activates when triggering the drill making it easier to work in dark or confined work spaces.
- The built-in bubble level helps improve accuracy while the magnetic base is perfect for holding loose screws or bits.
- This electric drill weighs just under 3.5lbs, with the battery, so it is easy for anyone to use. The perfect addition to any hand tool or power tool set.
- Offers keyless chuck and variable speed with 16 torque settings and 0-550RPM motor to help you accomplish any home improvement task.
|Milwaukee 2897-22 M18 Fuel 2-tool Combo Kit
Lowest new price: $289.00
Lowest used price: $330.00
List price: $300.00
The 2897-22 M18 FUEL 2-Tool Combo Kit is the highest performing Hammer Drill & Impact Driver Combo Kit on the market. Included is the M18 FUEL Hammer Drill (2704-20), the Most Powerful 18-volt cordless drill on the market. Delivering up to 1,200 in-lbs of torque and up to 2,000 RPM, it provides faster drilling speed under heavy load to increase productivity. Also included is the M18 FUEL 1/4 inch Hex Impact Driver (2753-20), the Most Powerful Impact Driver in its class. At 1800 in-lbs of fastening torque, this impact drives screws faster but also provides greater control over power and speed thanks to its proprietary 4-mode DRIVE CONTROL. M18 FUEL features the most advanced cordless technology available; a POWERSTATE Brushless Motor, REDLINK PLUS Electronic Intelligence and REDLITHIUM Battery Technology, resulting in longer motor life, more run time and more power. WHAT'S INCLUDED (1) M18 FUEL 1/2inch Hammer Drill/Driver (Bare Tool) (2704-20) (1) M18 FUEL 1/4inch Hex Impact Driver (Bare Tool) (2753-20) (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) M18 & M12 Multi-Voltage Charger (48-59-1812) (2) Belt Clip (2) Bit Holder (1) Side Handle (1) Carrying Case
- Hammer drill/driver's POWERSTATE Brushless Motor delivers 1200 in. lbs. of peak torque and up to 2000 RPM for faster drilling speeds.
- Impact driver's POWERSTATE Brushless Motor delivers 1800 in. lbs. of fastening torque for faster driving speeds.
- REDLITHIUM XC 5.0Ah batteries provide powerful performance.
- REDLITHIUM battery technology offers superior pack construction, electronics and performance to deliver exceptional work per charge and work over pack life.
- Includes 2704-20 1/2 in. hammer drill, 2753-20 1/4 in. hex impact driver, two (2) REDLITHIUM XC 5.0 batteries, M12-M18 multi-voltage charger, (2) belt clips, (2) bit holders, side handle and carrying case.
|DEWALT DCS331B 20-Volt MAX Li-Ion Jig Saw
Lowest new price: $149.00
List price: $159.00
The DEWALT DCS331B 20V MAX Jig Saw offers an all-metal lever-action keyless blade change which allows for quick and easy blade changes, along with an all-metal keyless shoe bevel with detents at 0Degree, 15Degree, 30Degree and 45Degree that provides versatility for easy bevel cutting. The 4-position orbital action provides control of cut quality and speed, and an adjustable dust blower keeps line of cut clear of chips. It features variable speed of 0-3,000 spm (strokes per minute) for versatility in a multitude of materials and applications, along with an anti-slip comfort grip for increased comfort and control. This jig saw accepts T-shank jig saw blades for professional results. Includes: DCS331 Jig Saw, and jig saw blade. This is a bare tool item (battery sold separately).
- All-metal lever-action keyless blade change allows for quick and easy blade changes
- All-metal keyless shoe bevel with detents at 0°, 15°, 30° and 45° provides versatility for easy bevel cutting
- 4-position orbital action provides control of cut quality and speed
- Adjustable dust blower keeps line of cut clear of chips
- Variable speed 0-3,000 spm for versatility in a multitude of materials and applications
|Bare-Tool Milwaukee 2625-20 M18 18-Volt Hackzall Cordless One-Handed Reciprocating Saw (Tool Only, No Battery)
Lowest new price: $101.83
Lowest used price: $75.99
List price: $101.85
M18 HACKZALL. The product is easy to use. The product is durable. The product is manufactured in China.
- The product is easy to use
- The product is durable
- The product is manufactured in China
- One-handed design provides superior control and versatility over a standard reciprocating saw
- Compact size allows for cutting in tight spaces, and light weight makes overhead work easier
- QUIK-LOK Blade Clamp offers fast, easy tool free blade changes for SAWZALL Blades and HACKZALL Blades
- Built-In LED light illuminates the work surface while cutting
- Compatible with M18 XC High Capacity LITHIUM-ION Batteries and M18 Compact LITHIUM-ION Batteries
Page 4 of 180
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.