Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Tools

Drill Presses


WEN 4208 8 in. 5-Speed Drill Press

WEN 4208 8 in. 5-Speed Drill Press Lowest new price: $89.40
List price: $99.65
Brand: WEN
Model: 2012187

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

Features:

  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
  • Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
  • Durable 1/3 HP induction motor develops ample torque and power
  • 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
  • Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
  • Includes: Drill Press, 1/2" Keyed Chuck, Chuck Key and Tools for Assembly
  • 620-3100 RPM Range (5 Speeds: 620, 1100, 1720, 2340, 3100) to accommodate various materials and thicknesses
  • Spindle Travel of 2" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
  • Durable 1/3hp induction motor develops ample torque and power
  • 6-1/2 x 6-1/2" cast iron worktable is height adjustable and bevels up to 45 Degree left & right

Similar Products:


Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench

Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench Lowest new price: $43.27
List price: $44.97
Brand: Dremel
Model: 220-01

It's a drill press, tool holder and flex shaft holder all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches.

Features:

  • Articulating Drill Press- Drills Perpendicular and Angled Holes in 15-degree Increments, up to 90 Degrees Horizontal
  • Tool Holder- Holds Tool at 90 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Pieces
  • Flex Shaft Tool Stand- Allows Telescopic Adjustment to Any Height Between 16 and 29 Inches, Crow's Nest Provides On-board Storage for Drill Bits, Wrenches, and Other Dremel Accessories
  • Cord Management Clips - for Safe Storage of Power Cords, Inch/Metric Marking on Base - For Accurate Drilling of Workpiece, Depth Markings with Depth Stop - for Consistent Depth, Sturdy Metal Base with 4 Clamping Points - to Securely Hold the Station.
  • Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000, 4200, 8100, 8200, 8220.

Similar Products:


WEN 4214 12-Inch Variable Speed Drill Press

WEN 4214 12-Inch Variable Speed Drill Press Lowest new price: $220.86
List price: $238.26
Brand: WEN
Model: 4214

Remember when power tools were actually powerful? WEN’s 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8” in 1” thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8” chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill with laser precision? Remember WEN.

Features:

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
  • Durable 2/3hp induction motor develops ample torque and power
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly

Similar Products:


WEN 4210 Drill Press with Laser, 10-Inch

WEN 4210 Drill Press with Laser, 10-Inch Lowest new price: $120.26
List price: $146.82
Brand: WEN
Model: 4210

Remember when power tools were actually powerful? WEN’s 10-inch swing drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger, more industrial type drill presses, you can power through metal, wood and other materials with ease. Change from five speeds to target the exact RPM right for your project (600, 1100, 1700, 2400, 3100 RPM). Rigid frame construction of cast iron provides sturdiness and reliability. Its powerful induction motor features ball bearings for an extended life, all combining together with smooth and balanced performance at any speed. The 1/2” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A very versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachment, drum sanders, circle cutters, etc… Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes with laser precision? Remember WEN.

Features:

  • Includes: Drill Press, Laser, 1/2" Keyed Chuck & Key, Tools for Assembly
  • Adjust between five speeds from 600 to 3100 RPM.
  • Spindle Travel of 2-1/2" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
  • Durable 3.2 AMP motor provides ample torque and power
  • 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degrees left & right

Similar Products:


SKIL 3320-01 3.2 Amp 10-Inch Drill Press

SKIL 3320-01 3.2 Amp 10-Inch Drill Press Lowest new price: $124.99
List price: $126.23
Brand: Skil
Model: 3320-01

SKIL 10 In. 5 Speed Drill

Features:

  • 1/2-Inch keyed chuck. Bump-off switch for added safety
  • 5 Speeds - 570 - 3,050 RPM
  • Adjustable depth stop for accurate measurements and repetitive drilling
  • 0-45 Degree Left/Right Tilting Work Surface
  • Laser X2 2-beam laser for precise hole alignment

Similar Products:


Shop Fox D4088 Lathe Attachment for Drill Press

Shop Fox D4088 Lathe Attachment for Drill Press Lowest new price: $35.71
List price: $38.00
Brand: Woodstock Wind Chimes
Model: D4088

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick change over from drill press mode to lathe mode. A 12-Inch tool rest allows a maximum work piece length of 24-Inch when the work piece is reversed.

Features:

  • Includes a base plate with live center, 12-Inch tool rest, mounting bolts, mini screw center and spur center
  • Fits all drill presses with a through hole in the table
  • Tool rest length: 12"
  • Maximum workpiece length: 24"
  • Maximum workpiece diameter: 6"

Similar Products:


CSLU-Tool Woodworker Square Hole Drill Bits Mortising Chisel Set, Mortise Chisel & Bit Set ( 1/4-Inch, 5/16-Inch, 3/8-Inch, 9/16-Inch, 5/8-Inch and 1/2-Inch)

CSLU-Tool Woodworker Square Hole Drill Bits Mortising Chisel Set, Mortise Chisel & Bit Set ( 1/4-Inch, 5/16-Inch, 3/8-Inch, 9/16-Inch, 5/8-Inch and 1/2-Inch) Lowest new price: $55.99
List price: $59.99
Brand: CSLU-Tool

Features:

Professional wood drill bit, suitable for construction, installation, renovation, decoration industry, etc.
Special steel, heat treatment, HRC48~50, high hardness, lengthened core, high concentricity.
It will get double effect by matched use with mortise and tenon machine, the square hole punching needs to use electric drill, hammer & other tools.
This quality set also comes with a convenient plastic storage case.

Specifications:

Material: HSS
Hardness: HRC 48~50
Holder diameter: 19mm (circular)
Drilling core length: 200mm
Slotting flute diameter Total weight
001 1/4"(6.4mm) approx 150g
002 5/16"(8mm) approx 161g
003 3/8"(9.5mm) approx 177g
004 1/2"(12.7mm) approx 206g
005 9/16"(14mm) approx 251g
006 5/8"(16mm) approx 310g

Shaft length:
1/4"(6.35mm): 60mm
5/16"(8mm):60mm
3/8"(9.5mm):75mm
1/2"(12.7mm):60mm
9/16"(14mm):70mm
5/8"(16mm):70mm



Package Included:
6x Tenon Hole Drill Bit

Features:

  • Fits all mortising machines and drill press attachments
  • 1/4-Inch, 5/16-Inch, 3/8-Inch, 9/16-Inch, 5/8-Inch and 1/2-Inch sizes
  • Made of the highest quality tool steel
  • High performance flute design geometry for superior chip extraction
  • Hardness: HRC 48~50

Similar Products:


WEN 4212 10-Inch Variable Speed Drill Press

WEN 4212 10-Inch Variable Speed Drill Press Lowest new price: $173.72
List price: $173.72
Brand: WEN
Model: 4212

The WEN 10-Inch Variable Speed Drill Press with Laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron Drill Press has the power to drill through metal, wood and other materials. Max drill capacity is 1/2” in 1” thick cast iron. The variable speed features allows you to target in the exact speed (infinitely from 530-3100) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 1/2” chuck give you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective workholding. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A very versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachment, drum sanders, circle cutters, etc… Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project.

Features:

  • Includes: Drill Press, Mechanical Variable Speed, Laser, 1/2" Keyed Chuck & Key, Tools for Assembly
  • Infinitely variable speed range 530-3100 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
  • Spindle Travel of 2-3/8" with easy to read, adjustable depth stop for accurate and repeatable drilling operations
  • Durable 2/3hp induction motor develops ample torque to power through your project
  • 8 x 7-2/3" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right

Similar Products:


Hardware Factory Store 2 Way 4-Inch Drill Press X-Y Compound Vise Cross Slide Mill

Hardware Factory Store 2 Way 4-Inch Drill Press X-Y Compound Vise Cross Slide Mill Lowest new price: $40.17
List price: $40.17
Brand: Hardware Factory Store
Model: 16037

This 4" cross sliding vise will easily turn your drill press into a milling machine. Easily machine wood and metal parts with high precision and quality utilizing this vise and it's precise moving slides. Can also be attached to a lathe or other tools as needed to hold work pieces in the exact location needed.

Durable cast iron construction
Powerful serrated steel jaws
Cold rolled steel screws
2 swivel crank handles for adjusting vise front to back and left to right
Bolt down slots for securing
Hinged vise crank handles drops out of the way
Designed for woodworking and metalworking
3.5" throat opening
5" longitudinal and 4.5" cross travel

Features:

  • Durable cast iron construction, Powerful serrated steel jaws
  • 4 Inch Wide Jaw, Cold rolled steel screws
  • 2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing
  • Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking
  • 3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel

Similar Products:


Craftsman 10 in Bench Drill Press w/ Laser Trac

Craftsman 10 in Bench Drill Press w/ Laser Trac Lowest new price: $138.29
List price: $141.23

Powerful 6.0 Amp motor provides this Craftsman® drill press with long lasting and smooth operation for household projects. 1/2" keyed chuck, ideal for metal or wood drill bits and sanding drums with up to a 1/2" shank. Five speed settings ranging from 620-3100 RPM. Quick belt tension and release - allows for rapid spindle speed changes. Rack and Pinion table elevation system for quick and easy adjusting.

Features:

  • Five operating speeds with a range between 620 - 3100 RPM
  • 6.0 Amp, 120 Volts, 60 Hz motor
  • Rack and Pinion table elevation makes adjusting the table height easy and accurate
  • Scaled steel fence helps align, guide and brace workpieces, stop block for repetitive drilling jobs

Similar Products:


Next >>
Page 1 of 226

[Kindle]    [Kindle DX]
  Privacy Policy

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.