Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Tools

Jointers


The Hillman Group 122728 No.0 Wood Joiner, 40-Pack

The Hillman Group 122728 No.0 Wood Joiner, 40-Pack Lowest new price: $3.00
List price: $4.79
Brand: The Hillman Group
Model: 122728

These wood joiners are spiked strips that hold two pieces of wood side by side. Place the wood joiner over the two pieces at the joint and tap into wood with hammer. When space is available, use more than one joiner.

Features:

  • Helps make strong joints in furniture or screen repairs
  • Steel construction
  • Zinc Plated

Similar Products:


Cutech 40160HC-CT 6" Bench Top Spiral Cutterhead Jointer with Carbide Tips

Cutech 40160HC-CT 6" Bench Top Spiral Cutterhead Jointer with Carbide Tips Lowest new price: $379.99
List price: $379.99
Brand: Cutech Tool LLC

Don't let the price of this bench top jointer fool you! It's geared to serve both budget-minded novices and professionals with limited shop space. With its newly redesigned spiral type cutterhead featuring 12 carbide 2-sided carbide inserts you get a great finish and tear out is reduced due to better chip evacuation through its included 2 ½" dust port. The one piece 4 3/8" high by 19 5/8" adjustable fence can be tilted from 90 to 135 degrees with ease. The cast infeed and outfeed tables can easily be leveled if the need occurs and the cutterhead guard spring tension is also adjustable. It has a 6" width capacity and 1/8" maximum depth capacity and sports 30" of total table length for those longer boards. At about 40 lbs, and with a 120 VOLT 10 AMP motor, it's tough and easy to transport the job site if necessary. Push blocks and the tools necessary for rotating or replacing the cutter tips are included!

Features:

  • Powerful 10 Amp 120V motor
  • Spiral Style Cutterhead with 12 Carbide Tips
  • Fence with 90 to 135 Degree Tilt
  • Level adjustable beds

Similar Products:


Shop Fox W1829 Benchtop Jointer, 6-Inch

Shop Fox W1829 Benchtop Jointer, 6-Inch Lowest new price: $405.99
List price: $335.00
Brand: Shop Fox
Model: W1829

Motor: 1-1/2 horsepower, 110V, 12 amp, single-phase Cutter head speed: 10,000 RPM, 20,000 cuts per minute Two-knife HSS cutter head provides clean cuts 2-1/2-inch dust port keeps work area clear of dust Fully adjustable fence with stops

Features:

  • Motor: 1-1/2 horsepower, 110V, 12 amp, single-phase
  • Cutter head speed: 10,000 RPM, 20,000 cuts per minute
  • Two-knife HSS cutter head provides clean cuts, fully adjustable fence with stops
  • 2-1/2-inch dust port keeps work area clear of dust
  • Includes free pair of safety push blocks, built-in mini impeller-driven dust collection fan and collection bag

Similar Products:


Cutech 40180H-CT 8" Bench Top Spiral Cutterhead Jointer

Cutech 40180H-CT 8" Bench Top Spiral Cutterhead Jointer Lowest new price: $449.99
List price: $449.99
Brand: Cutech Tool LLC
Model: 40160H-CT

We listened to your requests and would like to introduce our new 8" model 40180H-CT bench top jointer with spiral style cutterhead! With it's width capacity of 8" and 33 1/2" overall table length, which is extendable to 51" total length, what more could you ask for in a bench top portable jointer? Featuring 16 HSS (high speed steel) 2-sided inserts you get a great finish and tear out is reduced due to better chip evacuation through its included 2 ½" and 4" dust port adapter. The one piece 4 3/8" high by 19 3/4" long adjustable fence can be tilted from 90 to 135 degrees with ease. The cast aluminum infeed and outfeed tables can easily be leveled if the need occurs and so can the extensions. At about 49 lbs, and with a 120 VOLT 10 AMP motor, it's a tough machine and can be easily transported to the job site if necessary. Push blocks and the tools necessary for rotating or replacing the cutter tips are included!

Features:

  • Powerful 10 Amp 120V motor
  • Spiral Cutterhead with 16 HSS Inserts
  • Fence with 90 to 135 Degree Tilt
  • Level adjustable beds

Similar Products:


The Hillman Group 122723 No.1 Wood Joiner, 30-Pack

The Hillman Group 122723 No.1 Wood Joiner, 30-Pack Lowest new price: $11.94
List price: $7.99
Brand: The Hillman Group
Model: 122723

These wood joiners are spiked strips that hold two pieces of wood side by side. Place the wood joiner over the two pieces at the joint and tap into wood with hammer. When space is available, use more than one joiner.

Features:

  • Helps make strong joints in furniture or screen repairs
  • Steel construction
  • Zinc Plated

Similar Products:


Porter-Cable PC160JTR 2-Blade 120V 6 in. Bench Jointer (Certified Refurbished)

Porter-Cable PC160JTR 2-Blade 120V 6 in. Bench Jointer (Certified Refurbished) Lowest new price: $249.99
List price: $249.99
Brand: PORTER-CABLE
Model: PC160JTR

This Certified Refurbished product has been tested and certified to work and look like new, with minimal to no signs of wear, by a specialized third-party seller approved by Amazon. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer.Includes 2-Blade 120V 6 in. Bench Jointer - PC160JTR

Features:

  • Variable speed range of 6000 - 11,000 RPM allows the user to select the right speed for the size and hardness of material being cutTwo-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
  • Built-in cutter head lock facilitates knife replacement and adjustment
  • Center mounted fence gives needed support throughout the cut for accurate edge jointing

Similar Products:


Powermatic 1610079 Model PJ882 8-Inch 2 Horsepower Parallelogram Jointer, 230-Volt 1 Phase

Powermatic 1610079 Model PJ882 8-Inch 2 Horsepower Parallelogram Jointer, 230-Volt 1 Phase Lowest new price: $2,299.99
List price: $2,299.99
Brand: Powermatic
Model: 1610079

1610079 Features: -8'' parallelogram jointer.-PJ882. Specifications: -2HP,1Ph. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 44'' H x 28'' W x 84'' D.

When we look at jointers, there are a couple of tests at the top of our list, and this model aces them all.

First, it’s got a generous 8-inch wide bed, and you can’t do better than that. But icing on the cake is the bed’s luxuriously long 82 inches, giving you absolute support and accuracy on the infeed side. We like the way the infeed table travels up and down; instead of a handwheel, you just loosen the locking lever and move the long-handled table adjustment arm. Leverage is our friend, and there’ll be no more skinned knuckles! Lock the lever again and you’re ready to cut. When you want to cut rabbets – a beautifully simple job on this jointer -- override the 1/8-inch depth limit by turning the control knob. Twist it again to re-engage this feature. The outfeed table adjusts to knife height easily, should your jointer not retain its factory setting during shipment. It’s worth checking.

We like this fence best of all the competitors for a couple of reasons. There’s a non-marring insert in the fence contacts that prevent scratching the infeed and outfeed tables while you’re adjusting it. The fence rides smoothly across the beds and locks easily. But its best trick is tilting 45 degrees – both forward and backward, giving you a total angle to the back of 135 degrees for beveling. And instead of grasping the whole fence to tilt it, this one moves beautifully by handwheel.

The three-knife cutterhead should be perfectly adjusted from the factory, but to be safe, we recommend checking it before running any stock. The head turns at 7,000 rpm, giving you 21,000 cuts per minute and a super-smooth surface.

The final feature that won our admiration is the placement of the power switch. You’ll find it below the infeed bed on most jointers, but on this Powermatic, it’s positioned on its own arm above the infeed table. We like this spot best for safety’s sake – a jointer is a beautiful machine, but with just a little operator error, it has the potential to maim. Having the power switch in the open just makes good safety sense.

We recognize that a jointer like this is a big investment, but we trust the Powermatic name for quality, reliability and a long life. You won’t regret this purchase. --Kris Jensen-Van Heste

Features:

  • Infeed/outfeed surface measures 8-by-82-Inch
  • Depth of cut limitation easily overridden for rabbeting cuts
  • Fence tilts 45 degrees to back and front; handwheel operation
  • No-mar fence insert keeps beds pristine during fence adjusent
  • 7,000 rpm cutterhead gives you 21,000 cuts per minute; limited lifetime warranty

Similar Products:


The Hillman Group 532437 Joint Fasteners 5/8-Inch, 20-Pack

The Hillman Group 532437 Joint Fasteners 5/8-Inch, 20-Pack Lowest new price: $0.99
List price: $5.03
Brand: The Hillman Group
Model: 532437

A joint fastener is a thin corrugated strip of steel that can be hammered into a wood joint to fasten it. It has a sharp side that is hammered into the wood joint. This type of joint fastener is the most common fastener used for joining mitred joints.

Features:

  • Used only where appearance is not important, on the backside of a project
  • These fasteners are made from 18 to 22 gauge metal sheets
  • Use in hard and soft wood
  • Can be used in both finished and rough carpentry


Powermatic 54A Deluxe 6-Inch Jointer with Quick-Set Knives

Powermatic 54A Deluxe 6-Inch Jointer with Quick-Set Knives Lowest new price: $1,049.99
List price: $1,049.99
Brand: Powermatic
Model: 1791279DXK

1791279DXK Features: -6'' jointer.-54A.-Quick set knives. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 37.5'' H x 24'' W x 66'' D.

The Powermatic 54A Six-Inch Jointer makes it easy to achieve the high levels of accuracy you need when creating flat, straight surfaces for elegant projects. Designed and built to provide precision and dependability, this jointer boasts a cutter-head with "Quick Set" knife system and heavy-duty construction for years of powerful performance.

The 54A Six-Inch Jointer
At a Glance:
  • Cutter-head features three auto-set knives that automatically align themselves
  • 66-inch long adjustable in-feed and out-feed tables provide more working surface
  • 1.0-hp motor offers plenty of power
  • Fence controls are center-mounted for convenience
  • Lockable push-button switch prevents accidental starting
5-year warranty

Product photo
The rugged fence is easily adjustable.
View larger.
Product photo
The three-knife cutter-head is easy to set, and blade changes are simple and quick. View larger.
Powerful Motor and Stable Design
Measuring 21 x 13 inches (W x D), the all-steel base cabinet provides stable footing for the Powermatic 54A and puts the table surface at a comfortable 32 inches above the floor.

The one-horsepower, one-Ph, 115-volt motor is mounted within the cabinet and can be converted to use 230-volt power. It's also located on a special mount within the base cabinet for easy belt-tension adjustments.

The base contains a dust collection chute that evacuates debris from below the cutter-head and guides the debris to the exterior four-inch diameter port near the floor for less mess, better air quality, and improved visibility of the work piece.

Three-Knife Cutter-Head for Smooth Cuts
The Powermatic 54A features a three-knife cutter-head fitted with adjustment cams that make setting knife heights both easy and accurate.

Each knife is made from high-quality steel for long-lasting performance. And since the knives are secured by a set of four gib screws and a gib plate, they are easy to change and set.

Generous Table Size and Easy Adjustability
With a width of 7-1/4 inches and length of 66 inches, the Powermatic 54A has the longest tables available in its class, so it provides plenty of support for large work pieces.

The tables are precision ground to ensure flatness, and each is mounted on dovetailed ways that keep them aligned through height changes. For added convenience, you can adjust the out-feed table height via a hand wheel mounted below the table.

Additionally, an easy-to-read scale on the front side of the in-feed table allows quick and precise setting of specific cut changes, and a finger-operated gib screw locks the table in position once it is set.

Precisely Ground Fence
Like the tables, the cast-iron fence system is precisely ground. It tilts up to 45 degrees towards and away from the tables. Fully adjustable stops at 90 degrees (vertical) and each 45-degree position make setup fast and help keep the Powermatic 54A accurate.

For added convenience, the fence controls are center mounted, and a push-button switch is lockable to prevent accidental starting.

The Powermatic 54A is backed by a five-year warranty.

What's in the Box
One Powermatic 54A, one jointer stand, one door with mounting hardware, one dust chute with mounting hardware, one jointer assembly, one fence assembly, one pulley cover, one belt, one cutter-head guard, two hold-downs, one hardware bag, one fence handle, all necessary tools, manual, and warranty card.
Lifestyle photo
This jointer comes with two hold-down pads to protect your hands.

Features:

  • 6-inch jointer with a 66- by 7-¼-inch table surface equipped with quick-set knives
  • Powered by a 1-horsepower 1-ph motor
  • Quick-set knives offer fast, accurate and easy replacement
  • Heavy steel stand and cast iron center-mount fence, Assembly required
  • Fence has positive stops at 90 and 45 degrees

Similar Products:


Goldblatt G01165 Convex Brick Jointer, 3/4-Inch and 7/8-Inch

Goldblatt G01165 Convex Brick Jointer, 3/4-Inch and 7/8-Inch Lowest new price: $5.49
List price: $6.99
Brand: Goldblatt
Model: G01165

Manufactured using high carbon steel and high quality chrome vanadium steel for strength, durability and resistance to corrosion. These tools feature ID stamping showing size and brand.

Features:

  • 3/4" x 7/8" Heavy Duty Jointer
  • This product is highly durable
  • This product is made in China
  • Use on half round or sunken joints
  • Heavy gauge steel is long wearing
  • Easy to handle
  • Each end makes a different size joint

Similar Products:


<< Prev   Next >>
Page 4 of 14

[Kindle]    [Kindle DX]
  Privacy Policy

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.