|Browse by Catagory:
Job Site Office
Pool & Deck Repair Producs
Slides, Ladders & Diving Boards
|Wokesi 10Pcs,1/4"Cut Diameter,1/8''(3.175mm)Shank,Tungsten Carbide Cutter Burrs Grinding Head Fit Dremel Bits for Rotary Tools (1/4''1/8''Shank)
Lowest new price: $15.99
List price: $14.99
Brand: WKS TOOL
1.Compatible with most die grinders or rotary tools
2.Highly recommended for polishing metals and plastics, jewelers, lapidary use, hobbies, crafts, craft modeling, home repair and so much more
3.Extremely durable Lasts up to 10X longer than than high-speed steel cutting tools,and 200 times longer than wheels.Safe,reliable and convenient to use.
4. unsuitable for wood processing,pls use single cutter
- Cutting Diameter=1/4"(6mm),Shank Diameter=1/8(3.175mm)
- Material:tungsten carbide,long tool life.
- High micro hardness,high abrasion resistance,good toughness.
- Suitable for process Copper,aluminum,Alloy,Iron,Marble,Jade,Steel,Glass,and Plaster etc,
- Package:1 Pack of 10 Pieces
|Yakamoz 0.3mm - 4mm Micro Aluminum Portable Handheld Drill DIY PCB Mini Electric Hand Drill with 5A Power Supply & 10pcs Micro Drill Bits
Lowest new price: $26.99
List price: $39.99
Yakamoz 0.3mm - 4mm Micro Aluminum Portable Handheld Drill With Power Supply
Miniature hand-held electric drill, speed and stability, high power, high speed 13,000 rpm, reliable quality. 0.3mm-4mm precision steel drill, clamp executive firm, precise handy! Equipped with a 12V DC power supply, more secure. The machine is suitable for hand-held, easy to grip, easy to operate, easy to carry. Touch-point switch at any time stop, safe and reliable. The drill for drilling circuit boards, jewelry processing, wood drilling, soft metal drilling, copper and iron in the above drilling.
Use high-grade silver grind arenaceous aluminum alloy shell,is exquisite.
Apply to : PCB, circuit board, PVC plastic board, wooden board, thin plate, thin plate, thin aluminium plates, etc
Material : Aluminum
Color : Silver
Size : 130 x 40 mm(Without Drill Bits)
Power supply : USA Standard Plug
Input : 100-240VAC, 50/60Hz
Output : DC12V 5A
Set of 10 Micro Drill Size: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.6mm, 1.8mm, 2.0mm, 2.4mm, 2.6mm, 2.8mm
Package includes :
1 x 0.3mm - 4mm Micro Electric Drill
1 x Power Supply
1 x Drill Chuck Key
10 x Micro Drill Bits
※Note: There's small swing on the drill bits when it's running. Please think it over if you mind this drill bit swing.
- Electric portable DIY PCB handheld drill, durable and reliable.
- Low volume, light weight, easily carry, comfort grip handle.
- 0.3mm - 4mm Quick change chuck makes drilling work more convenience
- Ideal handheld Drill tool for PCB drilling, wood, plastic, paper, sheet metal, acrylic, Aluminum, etc. (Please Note: It is NOT suitable for heavy metal or high hardness material.)
- USA Standard Plug DC12V 5A Power Supply & 10pcs Micro Drill Bits Set Included
|Rotozip SS355-10 5.5 Amp High Speed Spiral Saw System with 2 Accessories
Lowest new price: $68.99
List price: $68.99
Rotozip SS355-10 5.5 Amp high-speed spiral saw system with 2 accessories
- 9-Inch length
- 5 amps, rating 120 v
- Spiral saw with collet system
|10pcs Diamond FG High Speed Burs Drill for Polishing Ceramic Composite
Lowest new price: $10.99
List price: $10.99
Burs handle diameter: 1.60mm
10pcs 1.60mm FG Creamics/Composite Polishing (Diamond FG burs)
① 001-016EF BR-40EF
② 166-016EF TC-11EF
③ 174-014EF TF-11EF
④ 174-016EF TF-12EF
⑤ 199-014EF TR-11EF
⑥ 237-021EF EX-21EF
⑦ 243-010EF FO-40EF
⑧ 249-014EF FO-21EF
⑨ 249-016EF FO-22EF
⑩ 254-016EF FO-30EF
|Dremel SM20-DR-RT Saw-Max Tool (Certified Refurbished)
Lowest new price: $49.99
List price: $49.99
This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes Saw-Max - SM20-DR-RT, Cutting Wheel, Allen Wrench
- Versatile cutting system for a variety of material including wood, plastic, metal, tile and masonry
- Powerful 6 Amp motor for easily tackling the toughest applications
- Worm Drive gearing for durability and power
- Dust extraction port for keeping the work place clean
- Perfect for straight, flush and plunge cuts
|Dremel EZ474SA Fine and Coarse Detail Abrasive Brush
Lowest new price: $7.78
List price: $7.78
The EZ474SA-01 abrasive brush kit includes two abrasive grits in one convenient package for numerous sanding options. EZ Lock abrasive brushes are great for detail cleaning and light sanding. Use on metal, wood, glass, aluminum and plastics. For use with the EZ402 EZ Lock mandrel or standard 402 mandrel.
- Two grits in one kit allow the completion of multiple sanding phases on a project
- Allows sanding of contours, details, and hard-to-reach areas
- Removes exterior surface layer without damage to base layer below (removes the paint but not the wood with light pressure)
- Clean wood, aluminum, plastic, metal, steel and vinyl
- EZ Lock compatible - use with either EZ402 or 402 mandrels
|Dremel 4000-3/34 120-Volt Variable Speed Rotary Tool Kit
Lowest new price: $85.50
List price: $96.98
4000-3/34 Features: -Dremel 4000. -Can be used with all existing Dremel accessories and attachments. -Slim, ergonomic body provides a 360° grip zone for comfort and control in any grip position. -6' cord length. Product Type: -Tool Grinders. Generic Specifications: -1.6 amps. -120 volts AC. -50 to 60 Hz. Dimensions: Overall Height - Top to Bottom: -7.38 Inches. Overall Width - Side to Side: -10.38 Inches. Overall Depth - Front to Back: -15.06 Inches. Overall Product Weight: -4.83 Pounds.
- Variable speed from 5,000 to 35,000 RPM
- Soft grip for comfort and control
- Works with standard attachments plus high performance level attachments
- Variable speed also features electronic feedback for consistent power at lower and mid-range speeds
- Replaceable motor brushes
|KOTVTM 10PCS Solid Carbide Burrs for Rotary Drill Die Grinder Carving Tool Set
Lowest new price: $13.99
List price: $13.99
Material:Tungsten Carbide. 1:Tungsten Carbide Double Cut Rotary Burr 1/8" Shank Fit Rotary Tools Shank diameter: 3mm, Shank Length: 35mm,Cutting Edge Diameter: 6 mm Total length: 45-50 mm,Use: Rotary Burr Works with mostly small rotary tools for DIY carving fans. 2:10 pieces of tungsten carbide burr. They are in different shape likes sphere, cylinder or long nose, etc....... 1/8"(3mm) shank, 1- 3/4"(45mm) total length, 1/4" (6mm) head size. Produced by excellent quality material. Come with. 3:10Pcs buffing wheels forThe, Different shapes of drill composition,They are suitable for polishing metals and plastics. Can be used with most hand power tools, including Rotary Tools, and many others. Technical data: Working diameter: 20mm Material: cotton, felt, leather nylon,Maximum speed: 28.000 1/min Shank diameter: 3 mm. 4:is recommended to use water as a lubricant when using these burrs. allowing them to be compatible with most die grinders and rotary tools as, grind and finish your work with precision. When the job or project is complete, you'll be happy to place your burrs back into the compact storage case so you can store,Package Included:10pcs Rotary Tools. 5:Technical data: Working diameter: 20mm,Maximum speed: 28.000 1/min Shank diameter: 3 mm. Package Included: 10x Tungsten steel Solid Carbide Burrs and storage box
- Material: Tungsten Carbide
- Tungsten Carbide Double Cut Rotary Burr 1/8" Shank Fit Rotary Tools
- Total length:45-50 mm,Shank Diameter: 3mm,Shank Length:35mm,Cutting Edge Diameter:6 mm
- 10 Pcs Tungsten Carbide Rotary Burr Set
- 1/8'' shank tungsten carbide rotary burr, Good for your wood carving, drilling and engraving,professional tools
|Precise Rotary Carving Locator Positioner For Dremel Tools with Carbide Burr HSS Router File Bits
Lowest new price: $7.99
List price: $7.99
Brand: Micro Trader
-Keep the dremel more steady.
-It is very safe when you are using the dremel with it.
-Tough and very good quality.
-Great product and convenient.
-Easy to use and install.
1x Dremel Cutting Guide
6x HSS Routing Router Bits
Tool Converter Height:48mm
Tool Converter Diameter:60mm
Maximum Depth Adjustment:19mm
Type:Multipurpose Power Tools
Power Source:Not Specified
- Keep the dremel more steady.
- It is very safe when you are using the dremel with it.
- Tool Converter Height: 48mm
- Tool Converter Diameter: 60mm
- Maximum Depth Adjustment:19mm; Max RPM: 28,000
|WEN 2305 Rotary Tool Kit with Flex Shaft with SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
Lowest new price: $27.31
List price: $27.31
- Perfect for cutting, sanding, polishing, shaping, drilling, deburring, grinding and more
- Variable speed goes anywhere from 8,000 to 30,000 RPM
- Includes a 100-piece accessory set of bits, sanding discs, polishing pads, mandrels and more
- Titanium-coated diamond burrs
- Assorted shapes and sizes include: ball, cone, rounded cylinder, flat top cylinder, tapered & needle point
- All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
Page 4 of 253
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.